Canon MPC600F/400 Special Features, Special Dialling, Dialling an Overseas Number With Pauses

Chapter 6

Special Features

Special Dialling

This section explains special dialling features, such as dialling an overseas number, switching temporarily to tone dialling, and confirming a dial tone.

■Dialling an Overseas Number (With Pauses)

When you dial or register an overseas number, you may need to insert a pause within and/or after the number. The length and location of the pause depends on the telephone system of your country.

1Press Fax to set Fax Mode.

2Prepare the document and place it on the platen glass or load it into the ADF.

•If you use the platen glass, the LCD displays the standby mode.

•For colour sending, press Colour/B&W to turn on its light. (→ p. 4-1)

•To adjust the resolution and contrast, → p. 4-2.

Ex:

Ex:

27/12 2002 FRI 15:30

FaxOnly STANDARD

MEMORY USED

0%

(Currently used memory)

DOCUMENT READY

(Standby to scan)

6

3 Use the numeric buttons to dial the international access code.

Ex:

• If you enter the wrong number, press Stop/Reset, then enter the correct number.

• For details on international access codes, contact your local telephone company.

TEL=00

Special Features

4 If necessary, press Redial/Pause to enter a two-second* pause (p).

Ex:

• For a longer pause, press Redial/Pause again for another two- second* pause. Alternatively, you can change the length of the pause. (→ MID PAUSE SET, p. 9-5)

* The pause length varies depending on the current country selection.

TEL=00P

5 Use the numeric buttons to dial the country code, the area
		TEL=	00p81123
code, and the fax/telephone number of the other party.
	Ex:
• If you enter the wrong number, press Stop/Reset and start
again from step 3.
6 If necessary, press Redial/Pause to enter a pause.
		TEL=	00p81123P
• A pause at the end of a number (P) is fixed to ten seconds.
	Ex:

6-1