Canon MPC600F/400 manual Setting the Telephone Line Type, Dialling Through a Switchboard

Setting the Telephone Line Type

Before using your machine, you need to make sure it is set for your telephone line type. If you are unsure of your telephone line type, check with your local telephone company. The factory default setting of your machine varies depending on the current country selection. You can print the USER’S DATA LIST to check the current setting. (→ p. 2-5)

If you need to change the setting, follow this procedure.

1Press Menu.

2 Use ▲ or ▼ to select FAX SETTINGS.

3Press OK twice.

4 Use ▲ or ▼ to select TEL LINE TYPE.

5Press OK.

6 Use ▲ or ▼ to select the telephone line type setting you want to set.

•You can select from the following:

-ROTARY PULSE (For pulse dialling)

-TOUCH TONE (For tone dialling)

7 Press OK.

8 Press Stop/Reset to return to standby mode.

Ex:

Ex:

Ex:

MENU

5.FAX SETTINGS

FAX SETTINGS 1.USER SETTINGS

USER SETTINGS 1.DATE & TIME

USER SETTINGS 9.TEL LINE TYPE

TEL LINE TYPE TOUCH TONE

TEL LINE TYPE ROTARY PULSE

USER SETTINGS 10.R-KEY SETTING

1

2

Dialling Through a Switchboard

A PBX (Private Branch Exchange) is an on-site telephone switchboard. If your machine is connected through a PBX or other telephone switching system, you have to dial the outside line access number first, and then the number of the party you are calling.

To facilitate this procedure, you can register the PBX access type and the outside line access number under the R button so that you only need to press this button before dialling the fax/telephone number you want to reach. See below for details.

The settings available and the factory default setting vary depending on the current country selection. You can print the USER’S DATA LIST to check the current setting. (→ p. 2-5)

Press Menu.
Use ▲ or ▼ to select FAX SETTINGS.
		MENU
	Ex:	5.FAX SETTINGS

2-6