Switching Temporarily to Tone Dialling | Canon MPC600F/400 specification

7Press Start to begin scanning for sending.

•To cancel the transmission once dialling has started, press Stop/Reset then . (→ p. 4-9)

•To take advantage of the speed dialling features of your machine, register frequently used overseas numbers for one- touch or coded speed dialling. (→ pp. 3-2, 3-4)

■Switching Temporarily to Tone Dialling

Many information services for banks, airline reservations, hotel reservations, etc., require tone dialling for their services. If your machine is connected to a rotary pulse line, follow this procedure to set the machine temporarily for tone dialling:

1Press Fax to set Fax Mode.

2Press Hook.

•You can also lift the handset instead of pressing Hook.

3Use the numeric buttons to dial the telephone number of the information service.

•The machine connects using the pulses required by your telephone line.

4When the recorded message of the information service answers, press T ( ) to switch to tone dialling.

•When T ( ) is pressed, T is displayed in the LCD.

•If you pressed Hook in step 2, you can pick up the handset if you need to talk to the other party.

	27/12 2002 FRI 15:30
Ex:	FaxOnly	STANDARD


	TEL=


	TEL=	7654321
Ex:


	TEL=	7654321T
Ex:

5 Use the numeric buttons to enter the numbers requested by

	the information service.	Ex:
	• Numbers entered after pressing T ( ) will be dialled using	Ex:

	tone dialling.

TEL= 7654321T34

6When you have finished, press Hook to disconnect the call.

•If you used the handset, hang up to disconnect the call.

•Tone dialling is cancelled when you disconnect the call.

■Confirming a Dial Tone*

* This feature is only available for some countries.

This feature allows you to set your machine to listen for and detect a dial tone in the middle of a fax/telephone number before dialling the rest of the number. This is called Dial tone detection.

Follow this procedure for dial tone detection during regular dialling or when registering a number for speed dialling:

6-2

Image 52

Canon MPC600F/400 Switching Temporarily to Tone Dialling, Confirming a Dial Tone, Press Fax to set Fax Mode Press Hook

Contents

SmartBase MPC600F/400 Page Copyright Using Your DocumentationControlling the machine from your PC Trademarks Contents Summary of Settings Type Conventions Used in This Guide Page Customer Support IntroductionOperation Panel Standby Display Redial/Pause Coded Dial Hook Guidelines for entering Numbers, Letters, and Symbols Method 1 Using the Operation PanelMethod 2 Using the MultiPASS Suite Software Registering Information Continue entering other letters using the numeric buttons Continue entering other numbers using the numeric buttonsCorrecting a Mistake To Delete the Last Letter/Number What is Sender Information? Registering Sender Information Press OK Press Stop/Reset to return to standby mode Entering the Date and TimeRegistering Your Fax/Telephone Number and Name Press Menu Use or Hold to delete the previous entry and re-enter If you are unsure how to enter characters, → pMachine prints the USER’S Data List Dialling Through a Switchboard Setting the Telephone Line TypePress Menu Use or to select FAX Settings If you selected Hooking or Earth Connection in step If you selected Prefix in stepPage Speed Dialling What is Speed Dialling?Speed Dialling Methods One-Touch Speed Dialling Registering Numbers for One-Touch Speed DiallingUse the numeric buttons to enter the name that goes with Number max characters, including spaces Changing/Deleting a One-Touch Speed Dialling Entry To Change a One-Touch Speed Dialling Entry Registering Numbers for Coded Speed Dialling Coded Speed DiallingTo Delete a One-Touch Speed Dialling Entry Changing/Deleting a Coded Speed Dialling Entry You want to register max digits, including spacesPauses Use the numeric buttons to enter the fax/telephone number To Change a Coded Speed Dialling Entry To Delete a Coded Speed Dialling Entry Group Dialling Creating GroupsTo register a group under a one-touch speed dialling button To register a group under a coded speed dialling code To enter a destination registered for coded speed dialling Press Coded Dial, then use the numeric buttons to enter Speed Dialling Lists Printing Speed Dialling ListsTo select the list you want to print You can select from the following Touch SPD Dial List Samples of the lists are shown below Adjusting the Quality of Your Faxes Setting Colour or Black & White TransmissionSending Faxes Preparing to Send a Fax Setting the Scanning Contrast Setting the Scanning ResolutionUse or to select the resolution When the Fax Number is Not Registered in the Machine When the Fax Number is Registered in the MachineWhen You Dial from Your PC Dialling Methods One-Touch Speed Dialling Coded Speed Dialling Group Dialling PC Dialling Sending Methods Memory SendingDial the other party’s fax number Press Start to begin scanning for sending Press Start to begin scanning Press Fax to set Fax ModePress OK to send Manual Sending Via the Handset Press HookYou can also lift the handset instead of pressing Hook Machine begins sending the document Cancelling Sending Cancelling Memory SendingCancelling Manual Sending Via the Handset While a document is scanning Redialling When the Line is Busy Cancelling Manual RediallingCancelling Automatic Redialling Manual Redialling Sequential Broadcasting Sending a Document to More Than One DestinationOne-touch speed dialling Coded speed diallingPage Delayed Sending Documents Stored in MemoryPrinting a List of Documents in Memory Press Menu Use or to select Memory Reference Press OK twice Printing a Document in Memory Machine prints the document Checking a Document’s Details Deleting a Document from MemoryPress to delete the document Page Receiving Faxes Receive Mode Main Use Operation RequirementsDifferent Ways to Receive a Fax Setting the Options for FAX/TEL Auto SW What Happens When FAX/TEL Auto SW is Selected Make sure FaxTel is displayed in the LCD To set FAX/TEL Auto SW, → Quick Start Guide Receiving Faxes Manually Make sure Manual is displayed in the LCDIf you hear a person’s voice If you hear a slow beep tone or silence Receiving Faxes to the MultiPASS Suite When Your PC is OffPolling Receiving Receiving Faxes in Memory When a Problem Occurs Cancelling ReceivingCancelling Polling Receiving Receiving While Performing Other Tasks Special Dialling Special FeaturesDialling an Overseas Number With Pauses Switching Temporarily to Tone Dialling Press Fax to set Fax Mode Press HookWhen you have finished, press Hook to disconnect the call Confirming a Dial Tone Dialling Through a Switchboard Restricting Use of Your MachineEnabling Restriction of Your Machine Continue with the operation you are performing Cancelling Restriction of Your Machine Press Menu Use or to select System Settings Press OK twiceFollow this procedure to cancel restriction of your machine If you did not register a password, ignore this step Summary of Reports and Lists Reports and ListsReport or List Description Details Activity Report Press Menu Use or to select REPORTS/LISTS Press OK twice TX Transmission Report Slerexe Company Limited RX Reception Report Multi TX/RX Transaction Report LCD Messages TroubleshootingCause Action Message Error Code Cause Action Faxing Problems Sending ProblemsYou cannot send a fax Faxes sent from the machine are spotted or dirty Receiving Problems Cannot send using Error Correction Mode ECMErrors occur frequently while sending Cannot receive a fax automatically Cannot receive using Error Correction Mode ECM Cannot receive a document manuallyPrint quality is poor Faxes do not print Telephone Problems Errors occur frequently while receivingYou cannot dial Telephone disconnects while you are talking If a Power Cut Occurs If You Cannot Solve the ProblemPage Summary of Settings Accessing the MenusUnderstanding the Menu System Following illustrates the menu items in hierarchical order Menus in FAX Mode SettingsName Description Settings Name Prints the Coded Speed Dial LIST. → p Prints the Group Dial LIST. → pPrints the USER’S Data LIST. → p Registers information on One-Touch Speed Dialling. → p Enables/disables printing of the sender Information → p Enables/disables the off hook alarm that alertsSets the volume of the machine sounds Selects the line monitor volume sound during Off Press Redial/Pause Enables/disables Error Correction Mode ECM During reception When the machine is set to Manual ModeMode after it rings for a specified time Faxing capability. → p Enables/disables remote receiving. → p If you selects on above, selects the remote Receiving IDPaper loaded in the multi-purpose tray Selects the direction of the reductionPage Facsimile SpecificationsTelephone Page Index Dialling Speed See Speed diallingDocument Fax Problems Memory sendingMenus See also individual menu names Messages, LCD See also individual message Timer See Delayed sending Receiving See also individual receive modesRedialling Registering Timer sending See Delayed sending Telephone