Canon MPC600F/400 manual Setting the Options for FAX/TEL Auto SW

■Setting the Options for FAX/TEL AUTO SW

If you set FAX/TEL AUTO SW, you can control precisely how the machine handles incoming calls by adjusting the following settings:

•Adjust the time the machine takes to check whether a call is from a fax machine or a telephone (RING START TIME setting).

•Adjust the length of time the machine rings when the call is a voice call (F/T RING TIME setting).

•Set whether the machine switches to receive mode after the ring time set in F/T RING TIME has elapsed (DEFAULT ACTION setting).

•You can also set these options from the MultiPASS Suite. (→ MultiPASS Suite User’s Guide)

•The default settings and selectable settings vary depending on the current country selection.

■What Happens When FAX/TEL AUTO SW is Selected

Type of call

Telephone charges begin for the caller.

Telephone	Fax	Fax
	Sending document	Sending document
	manually	automatically

The machine answers without ringing.

The machine listens for the fax tone.

RING START TIME

F/T RING TIME

The fax tone is detected.

The fax tone is not detected.

The machine starts ringing.

If you don’t pick up the handset.

DEFAULT ACTION

Choose between:

RECEIVE and DISCONNECT.

The document is

received automatically.

The fax tone is detected and the machine switches to receive mode.

Pick up the handset

to talk.

DISCONNECT

The machine disconnects the call.

RECEIVE

Not all fax machines are capable of sending a fax tone. For those cases if you set the DEFAULT ACTION to RECEIVE, the machine switches to receive mode automatically and starts receiving the document. If no document comes in, it disconnects the call after approximately 40 seconds.

5-2