Canon MPC600F/400 manual Press Redial/Pause

		Name	Description	Settings
	2. RX REPORT		Enables/disables automatic printing of a reception	OUTPUT NO
			report. (→ p. 7-4)	PRINT ERROR
			OUTPUT NO:	ONLY
			No report is printed.	OUTPUT YES
			PRINT ERROR ONLY:
			Prints a report only when a reception error occurs.
			OUTPUT YES:
			Prints a report every time you receive a document.
	3. ACTIVITY REPORT		Enables/disables automatic printing of an	AUTO PRINT ON
			ACTIVITY REPORT after every 20 transactions.	AUTO PRINT OFF
			(→ p. 7-2)
3. TX SETTINGS
	1. ECM TX		Enable/disables Error Correction Mode (ECM)	ON
			during transmission.	OFF
	2. MID PAUSE SET		Selects the length of the pause entered when you	2 SEC
			press Redial/Pause.	(1 to 15)
	3. AUTO REDIAL		Enables/disables automatic redialling if the other	ON
			party’s line is busy on the first attempt. (→ p. 4-10)	OFF
		1. REDIAL TIMES	Selects the number of redial attempts.	2 TIMES
				(1 to 10)
		2. REDIAL	Selects the period of time between redial attempts.	2 MIN.
		INTERVAL		(1 to 99)
	4. TIME OUT		Enbles/disables automatic scanning of documents	ON
			after entering a fax number using speed dialling or	OFF
			redialling.
			ON:
			Scanning begins automatically five seconds after
			entering the fax number (10 seconds if sending to
			multiple destinations).
			OFF:
			Scanning does not start automatically. (You need to
			press Start to begin scanning.)
	5. TX START SPEED		Selects the speed at which the machine start	33600bps
			transmitting.	14400bps
				9600bps
				7200bps
				4800bps
				2400bps

9

Summary of Settings

9-5