Lexmark 701, 70E manual Troubleshooting, Before you troubleshoot, Setup troubleshooting

Troubleshooting 130

Troubleshooting

Before you troubleshoot

Use this checklist to solve most printer problems:

•Make sure the power cord is plugged into the printer and into a properly grounded, working electrical outlet.

•Make sure the printer is turned on.

•Make sure the printer is securely connected to the computer, print server, or network access point.

•Check the printer for error messages, and resolve any errors.

•Check for paper jam messages, and clear any jams.

•Check the ink cartridges, and install new cartridges if necessary.

•Turn the printer off, wait about 10 seconds, and then turn the printer back on.

Note: Make sure the printer is not in Sleep mode. Press and hold for three seconds to turn off the printer.

If Troubleshooting does not solve your problem

Visit our Web site at http://support.lexmark.com to find the following:

•Knowledgebase articles with the latest information and troubleshooting for your printer

•Live online customer support

•Contact numbers for telephone customer support

•Firmware and software updates

Setup troubleshooting

•“Incorrect language appears on the display” on page 131

•“Software did not install” on page 131

•“Print job does not print or is missing pages” on page 132

•“Printer is printing blank pages” on page 133

•“Printer is busy or does not respond” on page 134

•“Cannot delete documents from the print queue” on page 134

•“Cannot print through USB” on page 134