Lexmark 701 Print troubleshooting, Paper or specialty media misfeeds, Poor quality at the edges

Troubleshooting 150

3Reattach the ADF tray until it snaps into place.

4Touch OK or press , depending on your printer model.

Paper or specialty media misfeeds

These are possible solutions if paper or specialty media misfeeds or skews, or if multiple sheets feed or stick together. Try one or more of the following:

CHECK PAPER CONDITION

Use only new, unwrinkled paper.

CHECK PAPER LOADING

•Load a smaller amount of paper into the printer.

•Load paper with the print side facedown. (If you are not sure which side is the printable side, see the instructions that came with the paper.)

•Check the loading instructions for your paper or specialty media.

REMOVE EACH PAGE AS IT IS PRINTED

ADJUST THE PAPER GUIDES TO FIT THE LOADED PAPER

Print troubleshooting

•“Poor quality at the edges of the page” on page 150

•“Streaks or lines on printed image” on page 151

•“Print speed is slow” on page 152

•“Computer slows down when printing” on page 152

Poor quality at the edges of the page

If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following: