Lexmark 70E, 701 manual Printing on both sides of the paper duplexing

Printing 49

Warning—Potential Damage: Do not touch any open connector, the memory device, or the printer in the areas shown while actively printing, reading, or writing from the memory device. A loss of data can occur.

3If the PictBridge connection is successful, then the following message appears on the display: Use PictBridge

Device to choose and print photos. Press OK to select printer default settings.

4If you want to change the default print settings: a Press to access the PictBridge menu.

bPress the arrow buttons to select the paper source, paper setup, photo size, number of photos per page and print quality. You can also enhance the quality of graphics. Press each time you make a selection.

Note: The printer will use the default print settings unless you change the print settings from the camera.

5See the documentation that came with the camera to begin printing.

Note: If you insert the USB cable of the PictBridge‑enabled camera while the printer is performing another job, then wait for the job to finish before printing from the camera.

Printing on both sides of the paper (duplexing)

Printing on both sides of the paper (duplexing) automatically

Notes:

•The automatic duplex unit supports A4‑ and letter‑size paper. It also supports plain, premium plain, ColorLok certified plain, heavy plain, and letterhead paper types.

•Do not remove the page until printing is finished.

Warning—Potential Damage: Do not touch the duplex latch or latches while actively printing.

For Windows users

1With a document open, click File > Print.

2Click Properties, Preferences, Options, or Setup.

3Navigate to:

Layout tab > Print on Both Sides (Duplex) area > Print on both sides

•Click Long edge for print jobs with pages that are bound along the long edge of the page.

•Click Short edge for print jobs with pages that are bound along the short edge of the page.

4Click the Paper/Finishing tab, and then select a supported paper type.