Lexmark 70E, 701 manual Tips for scanning, Scanning to a local computer

Scanning 63

Scanning

ADF Scanner glass

Use the scanner glass for single pages, small items (such as postcards or photos), transparencies, photo paper, or thin media (such as magazine clippings).

Use the ADF for multiple‑page documents.

Note: The ADF is available only in select printer models. If you purchased a printer without an ADF, then load original documents or photos on the scanner glass.

Tips for scanning

•Use the scanner glass when scanning two‑sided pages if your printer does not support duplex scanning or the ADF does not support the original document size.

•When using the ADF, adjust the paper guide on the ADF to the width of the original document.

•When using the scanner glass, close the scanner cover, if possible, to avoid dark edges on the scanned image.

•Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF. Place these items on the scanner glass.

•When the document to be scanned is in place with the settings you want, press to start scanning.

Scanning to a local computer

1Load the original document faceup into the ADF or facedown on the scanner glass.

2From the printer control panel, navigate to:

> Scan > > Computer > USB‑Connected Computer > The USB‑connected computer will receive the scan by default.

Note: Make sure the scan software is installed on the destination computer.