Lexmark 701, 70E manual 110

3 A second print queue will be created. Remove the wireless queue if you do not want to switch back to accessing the printer over a wireless connection.

Add the printer. See “Adding the printer” on page 111.

2

Attach a USB cable to the computer and to the printer.

1

4 A second print queue will be created. Remove the Ethernet queue if you do not want to switch back to accessing the printer over an Ethernet connection.

If the printer is currently set up for wireless

Add the printer. See “Adding the printer” on page 111.

3

Firmly plug the rectangular end of the USB cable into the USB port of the computer.

2

Firmly plug the square end of the USB cable into the back of the printer.

1

Note: You will need to connect the printer to the computer with a USB cable. Make sure the printer is close enough to the computer for your USB cable to reach both.

3 Close all open applications.

4 Insert the installation software CD.

If the installation dialog does not appear after a minute, then click the CD icon on the desktop.

5 Double‑click Lexmark Extras > Lexmark Setup Assistant.

6 Follow the instructions on the computer screen.

7 A second print queue will be created. Remove the Ethernet queue if you do not want to switch back to accessing the printer over an Ethernet connection.

Using the printer locally (USB)

Select the connection type that describes how you currently access your printer:

If the printer is currently set up for Ethernet

Unplug the Ethernet cable from the printer.

Place the printer close to the computer you want to use to configure the printer for wireless access.

1

2

Networking

If the printer is currently set up locally (using USB connection) 1 Close all open applications.

2 Insert the installation software CD.

If the installation dialog does not appear after a minute, then click the CD icon on the desktop.

3 Double‑click Lexmark Extras > Lexmark Setup Assistant.

4 Follow the instructions on the computer screen.

Note: There is no need to remove the USB cable connecting the printer to the computer during wireless configuration.

If the printer is currently set up for Ethernet

110