Lexmark 701, 70E manual How do I send a fax at a scheduled time?, Press Dial tone

Faxing 94

Choose a fax quality that best suits the capacity of the receiving fax machine and the quality of the original document.

Quality	Black resolution	Color resolution
Standard	200 x 100	200 x 200
Fine	200 x 200	200 x 200
Superfine	300 x 300	200 x 200
Ultrafine	300 x 300 (half‑toned)	200 x 200

When sending a fax, after entering the fax number, press the arrow buttons to select a fax quality, and then press .

How do I send a fax at a scheduled time?

1From the printer control panel, navigate to: > Fax

2Enter the fax number of the recipient, or press Address Book to select a number from the Speed Dial or Group Dial list.

3Press the arrow buttons to scroll to Schedule Fax.

4Enter the time you want to send the fax, and then press .

5Press to start scanning the document and to save the scheduled fax.

The printer sends the fax at the designated time. Do not turn off the printer or unplug it from the telephone line before the scheduled time.

How do I send a fax using a phone calling card?

1Press Dial tone.

You should hear the dial tone of the telephone line.

2Enter the calling card information, and then when you are connected to the telephone carrier, follow the prompts.

3 When prompted, enter the fax number of the recipient, and then press .

How do I know that the fax was sent successfully?

You can set the printer to print a confirmation page, or transmission report, every time you send a fax. This report includes the date and time that the fax was sent. If the fax job is unsuccessful, then the report also includes the cause of the error.

1From the printer control panel, navigate to:

> Setup > > Fax Setup > > Fax Reports > > Transmission Log Printing >

2Press the arrow buttons to select a report printing option:

•If you want to print a report every time you send a fax, then select Print Log.

•If you do not want to print the report, then select Do not print log.

•If you want to save on ink and print a report only when a fax job is unsuccessful, then select Print only for error.

3Press .