Lexmark 701, 70E manual Installing the printer on a wireless network, Encryption

Networking 100

Encryption

Check the encryption method used on your network.

Note: Some authentication types may be available only in select printer models or operating systems.

Authentication type Encryption method

Open Mode	•	None
	•	WEP
Shared Mode		WEP
WPA Personal		TKIP
WPA2‑Personal	•	TKIP
	•	AES
WPA2‑Enterprise	•	TKIP
	•	AES
802.1X ‑ RADIUS	•	None
	•	WEP‑DynamicKeys
	•	WEP‑StaticKeys
	•	WPA‑TKIP
	•	WPA‑AES

Installing the printer on a wireless network

Before you install the printer on a wireless network, make sure that:

•Your wireless network is set up and working properly.

•The computer you are using is connected to the same wireless network where you want to set up the printer.

For Windows users

1Close all open software programs.

2Insert the installation software CD.

If the installation dialog does not appear after a minute, then launch the CD manually:

aClick , or click Start and then click Run.

bIn the Start Search or Run box, type D:\setup.exe, where D is the letter of your CD or DVD drive. c Press Enter, or click OK.

3Follow the instructions on the computer screen.

Note: Select Wireless connection when prompted to select a connection type.

For Macintosh users

1Close all open applications.

2Insert the installation software CD.

If the installation dialog does not appear after a minute, then click the CD icon on the desktop.