Error Codes
Error Items | Code | Error Beep |
| Cause/Remedy | |
|
|
|
|
| |
|
|
| Cause: | Power frequency is other than 60 Hz. | |
|
|
| Remedy: • Unplug the power cord plug and check if the | ||
|
| One long beep |
| power frequency is 60 Hz. | |
Power frequency Error(50/60Hz) | E1 |
| • Plug the power cord in 60 Hz power source and | ||
for 2 sec |
| ||||
|
|
| see If “E1” appears. If the error code is displayed | ||
|
|
|
| ||
|
|
|
| again even after the correct power source is | |
|
|
|
| provided, contact the nearest service center. | |
|
|
|
|
| |
|
|
| Cause: | Memory IC (EEPROM IC) is not working correctly. | |
|
|
|
| In this case, other features except for memory | |
|
|
|
| function work properly. (You can operate the oven | |
EEPROM Error | E5 | One long beep |
| manually) | |
Remedy: | Press CANCEL pad one or more times and try | ||||
|
| for 2 sec | |||
|
|
|
| to start a memory function program. If the error | |
|
|
|
| code “E5” persists, contact your nearest service | |
|
|
|
| center. | |
|
|
|
|
| |
Before Calling for Service
Warning
To avoid electrical shock which can cause severe personal injury, do not remove outer case at any time.
Only authorized servicer should remove outer case.
If oven does not operate:
●Confirm oven is plugged into dedicated circuit.
●Confirm oven is on grounded and polarized circuit. (Contact electrician to confirm)
●Check fuse or circuit breaker.
If oven light does not work:
●Confirm light bulb is screwed in tightly.
●Confirm light bulb is not defective.
If oven operates intermittently:
●Check inlet and discharge areas for obstructions.
If oven does not accept entries when pad is
pressed:
●Open and close oven door. Press pad again.
If oven malfunctions:
●Unplug oven, wait for 1 minute, and plug in oven.
18
