Memory Pads Programming
1Press PROGRAM pad(hold for more than 2 seconds).
Result: PROG indicator appears in the digital display.
2Press appropriate NUMBER pad for the desired memory number.
Result: Selected memory program code appears below the PROGRAM indicator.
3Select power level by pressing the POWER LEVEL or DEFROST pad. Result: Default power level HIGH appears in the display at first press of
the POWER LEVEL pad.
➢Press the POWER LEVEL or DEFROST pad one or more times until you get the desired power level.
4Press NUMBER pads to set the cooking time.
➢The maximum time according to each cooking power level can be referred to in the title “Power Levels and Time Variations” on page 11. The NUMBER pads will not operate or respond when you press a cooking time exceeding the maximum value.
It is not possible to set a cooking time for longer than the maximum time allowed on the chosen program. The power level indicator will flash and it is advisable to press Stop/Cancel and to enter a new power level and cooking time.
5Press PROGRAM pad(hold for more than 2 seconds)
Result: PROG indicator and memory number indicator blink 3 times in the digital display with a beep sound. And then the display goes blank.
Caution: Be sure to press the pads firmly in the right position.
6When you want to program more, repeat the procedures above again.
➢Memory programs are available for up to 20 items. Make sure the unit is properly programmed.
After programming is finished, all you have to do for memory cooking is to press the NUMBER pad. Then the selected memory program automatically starts cooking.
13
