CM1029B-2 6/14/00 10:24 AM Page 10
Cooking/Reheating
This oven is preset at the factory for automatic operation.
➢When you first plug in the power cord, the oven beeps once and all the indicators are displayed in the display window for 5 sec.
➢When heating cycle is completed and you open the door, the oven lamp and the cooling fan automatically turn on and goes off 1 min later.
➢When you open the door during a heating cycle, the oven stops operating and the oven lamp as well as the cooling fan automatically turns on for 1 min and goes off 1 min later. If you leave the oven door open for more than 1 min, the oven beeps once every minute and after 5 min the power source check indicator ‘ON’ appears in the display window.
1Make sure the oven is plugged into a properly grounded electrical outlet and “ON” appears in the display window.
2Open the door.
The oven lamp will be turned on.
3Put the food into a suitable container, place it in the centre of the oven and then close the door securely.
Result: The oven lamp will go off.
4Select the desired power level by pressing the Power Level Selector pad. Result: The selected power level will be displayed in the display window.
5Set the desired heating time by pressing the Number pads. Result: The selected time is displayed in the display window.
6Press Start pad:
Result: The oven lamp and cooling fan will be turned on. Heating will start.
The time on digital display will count down.
7When all time has elapsed, the end of cycle Beep Tone will sound 4 times and all heating will stop. The oven lamp will go off. For 1 min, the display shows ‘ 
‘ and the cooling fan will keep working in order to cool down the interior parts. During the time, the fan will not stop even when you open the door. 1 min later it will stop and “ON” appears again. Food may be removed from oven while the fan is still running.
8Open the door and take the food out.
9Close the door. The oven lamp will go off.
➢While in a heating cycle, one press on Stop/Cancel pad stops the oven. At this time, the Power Check Indicator “ON” starts blinking and goes off when the Stop/Cancel pad or Start pad is pressed again. You can restart it by pressing the Start pad or a second press on Stop/Cancel pad will cancel the selected program. While NOT in a heating cycle, one tap on Stop/Cancel pad cancels the selected program. You can press Start/30sec.+ pad one or more times in order to add the cooking time by 30 seconds. But you can not exceed the maximum time per power level allowed for power level selected.
10
