Polycom SIP 3.1 manual Missed Call Tracking missedCallTracking, Call Waiting callWaiting

Configuration Files

Missed Call Tracking <missedCallTracking/>

You can enable/disable missed call tracking on a per-line basis.

In the following table, x is the registration number. IP 301, 320, 330, 430: x=1-2;

IP 501: x=1-3; IP 550, 560: x=1-4; IP 600: x=1-6; IP 601: x=1-12;

IP 650, 670: x=1-34; IP 4000: x=1; IP 6000: x=1; IP 7000: x=1.

	Permitted
Attribute	Values	Default	Interpretation
call.missedCallTracking.x.enabled	0, 1	1	If set to 1 or Null, missed call tracking is
			enabled.
			If call.missedCallTracking.x.enabled is
			set to 0, then missedCall counter is not
			updated regardless of what
			call.serverMissedCalls.x.enabled is set
			to (and regardless of how the server is
			configured). There is no Missed Call List
			provided under Menu > Features of the phone.
			If call.missedCallTracking.x.enabled is
			set to 1 and call.serverMissedCalls.x.enabled
			is set to 0, then the number of missedCall
			counter is incremented regardless of how the
			server is configured.
			If call.missedCallTracking.x.enabled is
			set to 1 and
			call.serverMissedCalls.x.enabled is set
			to 1, then the handling of missedCalls depends
			on how the server is configured.

Call Waiting <callWaiting/>

This configuration attribute is defined as follows:

Attribute	Permitted	Default	Interpretation
	Values
call.callWaiting.ring	beep, ring,	beep	Specifies the ring tone heard on an incoming
	silent		call when another call is active.
			If set to Null, the default value is beep.

A - 113