Polycom SIP 3.1 manual Do one of the following steps

Setting up Your System

To upgrade your SIP application:

1.Do one of the following steps:

a Place the bootrom.ld file corresponding to BootROM revision 4.0.0 (or later) onto the boot server.

b Ensure that all phones are running BootROM 4.0.0 or later code.

2.Copy sip.ld, sip.cfg and phone1.cfg from the SIP2.2.0 or later release distribution onto the boot server.

These are the relevant files for all phones except the SoundPoint IP 300 and 500 phones.

3.Rename sip.ld, sip.cfg, and sip_212.ld, sip_212.cfg, and server.

phone1.cfg from the previous distribution to phone1_212.cfg respectively on the boot

These are the relevant files for supporting the SoundPoint IP 300 and 500 phones.

4.Modify the 000000000000.cfg file, if required, to match your configuration file structure.

For example:

<APPLICATION

APP_FILE_PATH="sip.ld"

APP_FILE_PATH_SPIP500="sip_212.ld"

APP_FILE_PATH_SPIP300="sip_212.ld"

CONFIG_FILES="[PHONE_MAC_ADDRESS]-user.cfg, phone1.cfg, sip.cfg" CONFIG_FILES_SPIP500="[PHONE_MAC_ADDRESS]-user.cfg,

phone1_212.cfg, sip_212.cfg" CONFIG_FILES_SPIP300="[PHONE_MAC_ADDRESS]-user.cfg,

phone1_212.cfg, sip_212.cfg" MISC_FILES="" LOG_FILE_DIRECTORY=""

OVERRIDES_DIRECTORY=""

CONTACTS_DIRECTORY="" />

5.Remove any <Ethernet address>.cfg files that may have been used with earlier releases from the boot server.

Note	This approach takes advantage of an enhancement that was added in
	SIP2.0.1/BootROM 3.2.1 that allows for the substitution of the phone specific
	[MACADDRESS] inside configuration files. This avoids the need to create unique
	<Ethernet address>.cfg files for each phone such that the default
	000000000000.cfg file can be used for all phones in a deployment.
	If this approach is not used, then changes will need to be made to all the <Ethernet
	address>.cfg files for SoundPoint IP 300 and 500 phones or all of the <Ethernet
	address>.cfg files if it is not explicitly known which phones are SoundPoint IP 300
	and 500 phones.

3 - 21