Polycom SIP 3.1 manual Refer to Roaming Buddies roamingbuddies/ on page A-122

Configuring Your System

eLocate the voIpProt parameter.

Set the voIpProt.server.x.transport attribute to TCPpreferred or TLS.

Your selection depends on the LCS configuration.

Note The TLS protocol is not supported on SoundPoint IP 300 and 500 phones.

fSet the voIpProt.server.x.address to the LCS address.

For example, voIpProt.server.1.address = "lcs2005.local"

gSet the voIpProt.SIP.lcs attribute to 1.

h(Optional) If SIP forking is desired, set voIpProt.SIP.ms-forkingattribute to 1.

Refer to SIP <SIP/> on page A-10.

iSave the modified sip.cfg configuration file.

2.Modify the phone1.cfg configuration file as follows:

aOpen phone1.cfg in an XML editor.

bLocate the registration parameter.

cSet the reg.1.address to the LCS address. For example, reg.1.address = "7778"

dSet the reg.1.server.y.address to the LCS server name.

e(Optional) Set the reg.1.server.y.transport attribute to TCPpreferred or TLS.

Your selection depends on the LCS configuration.

fSet reg.1.auth.userId to the phone's LCS username. For example, reg.1.auth.userId = "jbloggs"

gSet reg.1.auth.password to the LCS password.

For example, reg.1.auth.password = "Password2"

hLocate the roaming_buddies attribute.

iSet the roaming_buddies.reg element to 1.

Refer to Roaming Buddies <roaming_buddies/> on page A-122.

jLocate the roaming_privacy attribute.

kSet the roaming_privacy.reg element to 1.

Refer to Roaming Privacy <roaming_privacy/> on page A-123.

lSave the modified phone1.cfg configuration file.

4 - 63