Polycom SIP 3.1 manual Miscellaneous Patterns, Call Progress Patterns

Configuration Files

Note	Currently, patterns that use the sampled instruction are limited to the following
	format: sampled followed by optional silence and optional branch back to the
	beginning.
	In the following table, x is the pattern number, y is the instruction number.
	Both x and y need to be sequential. There are three categories of sound effect
	patterns: callProg (Call Progress Patterns), ringer (Ringer Patterns) and misc
	(Miscellaneous Patterns).
	Permitted
Attribute	Values	Interpretation
se.pat.callProg.x.name	UTF-8	Used for identification purposes in the user interface (currently
	encoded	used for ringer patterns only); for patterns that use a sampled
	string	audio file which has been overridden by a downloaded
		replacement, the se.pat.ringer.x.name parameter will be
		overridden in the user interface by the file names of the wave file.
se.pat.callProg.x.inst.y.type	sampled OR	As above.
	chord OR
	silence OR
	branch
se.pat.callProg.x.inst.y.	integer	Instruction type:	Interpretation:
value		sampled	sampled audio file number
		chord	chord set number
		silence	silence duration in ms
		branch	number of instructions to advance
se.pat.callProg.x.inst.y.	positive	If instruction type is chord, this optional parameter specifies the on
param	integer	duration to be used, overriding the on duration specified in the
		chord-set definition.

Call Progress Patterns

The following table maps call progress patterns to their usage within the phone.

Call progress	Use within phone
pattern number
1	dial tone
2	busy tone
3	ring back tone
4	reorder tone
5	stuttered dial tone
6	call waiting tone

A - 33