Polycom SIP 3.1 manual Recording and Playback of Audio Calls, Configuration File Example

Configuring Your System

Configuration File Example

The following excerpt from the sip.cfg configuration file shows an example where downloaded entries are limited to any where the phone number is in the 604 area code:

dir.corp.address=”

dir.corp.port=”389”

dir.corp.transport=”TCP”

dir.corp.baseDN=”cn=Users,dc=yourcompany,dc=local

dir.corp.user=”ldapadmin”

dir.corp.password=”12345678”

dir.corp.filterPrefix=”(objectclass=person)”

dir.corp.scope=”sub”

dir.corp.attribute.1.name=”sn” dir.corp.attribute.1.label=”Last Name” dir.corp.attribute.1.type=”last_name” dir.corp.attribute.1.filter=”” dir.corp.attribute.1.sticky=”0” dir.corp.attribute.2.name=”givenName” dir.corp.attribute.2.label=”First Name” dir.corp.attribute.2.type=”first_name” dir.corp.attribute.2.filter=”” dir.corp.attribute.2.sticky=”0” dir.corp.attribute.3.name=”telephoneNumber” dir.corp.attribute.3.label=”Phone Number” dir.corp.attribute.3.type=”phone_number” dir.corp.attribute.3.filter=”604” dir.corp.attribute.3.sticky=”0” dir.corp.backGroundSync=”0” dir.corp.backGroundSync.period=”86400” dir.corp.viewPersistence=”1”

Recording and Playback of Audio Calls

Note	This feature requires a license key for activation. Using this feature may require
	purchase of a license key or activation by Polycom channels. For more information,
	contact your Certified Polycom Reseller.
	SoundPoint IP phones that have a USB port can be configured to allow
	recording of audio calls on a supported USB device. Only the SoundPoint IP
	650 and 670 have a functioning USB port.
	The filenames of the recorded .wav files will include a date/time stamp (for
	example, 20Apr2007_190012.wav was created on April 20, 2007 at 19:00:12).
	An indication of the recording time remaining—the space available of the
	attached USB storage media—appears on the graphic display. The user can
	browse through all recorded files through the menu shown on the graphic
	display.

4 - 37