Polycom SIP 3.1 manual Configuring Your System, Setting Up Basic Features

4

Configuring Your System

After you set up your SoundPoint IP / SoundStation IP phones on the network, you can allow users to place and answer calls using the default configuration, however, you may be require some basic changes to optimize your system for best results.

This chapter provides information for making configuration changes for:

•Setting Up Basic Features

•Setting Up Advanced Features

•Setting Up Audio Features

•Setting Up Security Features

This chapter also provides instructions on:

•Configuring SoundPoint IP / SoundStation IP Phones Locally

To troubleshoot any problems with your SoundPoint IP / SoundStation IP phones on the network, refer to Troubleshooting Your SoundPoint IP / SoundStation IP Phones on page 5-1. For more information on the configuration files, refer to Configuration Files on page A-1.

Setting Up Basic Features

This section provides information for making configuration changes for the following basic features:

•Call Log

•Call Timer

•Call Waiting

•Called Party Identification

•Calling Party Identification

•Missed Call Notification

4 - 1