Polycom SIP 3.1 Refer to Supported Provisioning Protocols on page 3-4. A, this will be ignored

Administrator’s Guide SoundPoint IP / SoundStation IP

Name	Possible Values		Description
Server Address	dotted-decimal IP address		The boot server to use if the DHCP client is disabled, the
	OR		DHCP server does not send a boot server option, or the
	domain name string		Boot Server parameter is set to Static. The phone can
	OR		contact multiple IP addresses per DNS name. These
	URL		redundant boot servers must all use the same protocol. If
	All addresses can be followed		a URL is used it can include a user name and password.
			Refer to Supported Provisioning Protocols on page 3-4. A
	by an optional directory and
			directory and the master configuration file can be
	optional file name.
			specified.
			Note: ":", "@", or "/" can be used in the user name or
			password these characters if they are correctly escaped
			using the method specified in RFC 1738.
Server User	any string		The user name used when the phone logs into the server
			(if required) for the selected Server Type.
			Note: If the Server Address is a URL with a user name,
			this will be ignored.
Server Password	any string		The password used when the phone logs in to the server
			if required for the selected Server Type.
			Note: If the Server Address is a URL with user name and
			password, this will be ignored.
File Transmit Tries	1 to 10		The number of attempts to transfer a file. (An attempt is
	Default 3		defined as trying to download the file from all IP
			addresses that map to a particular domain name.)
Retry Wait	0 to 300		The minimum amount of time that must elapse before
	Default 1		retrying a file transfer, in seconds. The time is measured
			from the start of a transfer attempt which is defined as the
			set of upload/download transactions made with the IP
			addresses that map to a given boot server's DNS host
			name. If the set of transactions in an attempt is equal to or
			greater than the Retry Wait value, then there will be no
			further delay before the next attempt is started.
			For more information, refer to Deploying Phones From the
			Boot Server on page 3-14.
Network	Cable/DSL,		The network environment the phone is operating in.
	LAN,		The default value is Cable/DSL.
	Dial-up
Tag SN to UA	Disabled, Enabled		If enabled, the phone’s serial number (MAC address) is
			included in the User-Agent header of the Microbrowser.
			The default value is Disabled.
Note
		The Server User and Server Password parameters should be changed from the
		default values. Note that for insecure protocols the user chosen should have very
		few privileges on the server.

3 - 10