60

CHAPTER

5

Web Interface

Once you have installed an APC KVM switch, you have the ability to view and configure unit parameters, determine who has access and control rights, view and control currently active video sessions and execute a variety of control functions such as rebooting and upgrading your KVM switch from the web interface. The web interface has four tabs: Connections, Configure, Status and Tools.

Accessing Servers From The Web Interface

The Connections tab in the web interface allows you to view the connected servers and their status. You may click on a server name to launch the Video Viewer.

To launch the web interface, see Launching the web interface on page 10.

Table 5.1: Web Interface Server Status Symbols

Symbol Description

Server is online

Server is offline

Server is unavailable

Viewing and Configuring KVM Switch Settings

The Configure tab displays a list of categories covering a wide range of parameters for your KVM switches. When a category is selected from the list, the settings associated with the category are read from the unit. You can then modify the settings and send the changes securely back to the KVM switches.

To change the network settings:

1.In the web interface, click the Configure tab.

Page 72
Image 72
APC AP5616, AP5610, AP5615 manual Accessing Servers From The Web Interface, Viewing and Configuring KVM Switch Settings