Chapter 6: Video Viewer

87

 

 

Additional video adjustment

Generally, the Video Viewer automatic adjustment feature optimizes the video for the best possible view. However, you can fine tune the video with the help of APC technical support. Video adjustment is a global setting and applies to each target device you access.

NOTE: The following video adjustments should be made only on the advice and with the help of APC technical support. To contact APC technical support, visit www.apc.com.

To manually adjust the video quality of the window, complete the following steps:

1.Select Tools — Manual Video Adjust from the Video Viewer menu. The Manual Video Adjust window opens. See Table 6.4 on page 88.

2.Click the icon corresponding to the feature to adjust.

3.Move the slider bar and then fine tune the setting by clicking the Min (-)or Max (+) buttons to adjust the parameter for each icon pressed. The adjustments take effect immediately in the Video Viewer window.

4.When finished, click Close to exit the Manual Video Adjust window.

Figure 6.2: Manual Video Adjust window

Page 99
Image 99
APC AP5616, AP5610, AP5615 manual Additional video adjustment, Manual Video Adjust window