Chapter 4: Network Access Software

49

 

 

Click the Properties task button.

— or —

Right-click on the unit. Select Properties from the pop-up menu. The Properties

dialog box appears.

3.Click the Telnet tab.

4.For servers only, in the IP Address field, enter an IP address in dot notation or enter a 1-128 character domain name. Spaces are not allowed. Duplicate addresses are allowed.

5.In the Port field, enter a port number in the range 23-65535. If blank, port 23 is used.

6.Enable or disable the Use Default by marking or clearing the checkbox. When enabled, the default global setting specified in Options will be used and all other portions of the Application to Launch area are disabled.

7.Enable or disable the Launch built-in application by marking or clearing the checkbox. When enabled, the built-in Serial Console Viewer application will be used to connect to this unit. If you enable the Launch built-in application checkbox, you may also enable or disable the Open Window before login checkbox. When this checkbox is enabled, the Serial Console Viewer Telnet window will open before any login attempt is made to the server. This feature is useful when debugging a login script, and is usually disabled otherwise.

8.Enable or disable the Launch user-specifiedapplication by marking or clearing the checkbox. When enabled, the Telnet application specified in the field below the checkbox will be used.

a.Enter the directory path and name or click the Browse button to locate the path and name.

b.Enter command line arguments in the box below the path and name.

c.To insert a predefined macro at the cursor location in the command line, click the Insert Macro list box and select a macro from the drop-down menu. Network Access Software will automatically replace these variables when the application runs.

d.Enable or disable the Launch in command window by marking or clearing the checkbox. When enabled, the

user-specified Telnet application will be launched from within an OS command window.

9.Click OK.

Customizing Options

Set general options for the Network Access Software in the Options window. General options include custom field names, selected view on startup, browser application and DirectDraw support.

Viewing and changing general options

You can customize options for the Network Access Software, including custom name fields, default view and default browser.

Page 61
Image 61
APC AP5610, AP5616, AP5615 manual Customizing Options, Viewing and changing general options