APC AP5610, AP5616, AP5615 manual Configuring The KVM Switch And The OSD

Chapter 3: Basic Operations 19

Table 3.2: OSD interface navigation basics (Continued)

Key, key combination, or
mouse action	Result
Alt+O	Click OK and return to the previous window.
Alt+port number	Select a target device to be scanned; port number is the port number of the
	target device.
Enter	Completes a switch in the Main window and exits the OSD interface.
Print Screen, Backspace	Return to the previously selected target device.
Print Screen, Alt+0	Disconnect the user from the selected target device. The zero must be typed
	on the main keyboard, not the numeric keypad.
Print Screen, Pause	Start the screen saver immediately and lock the user, if it is
	password-protected.
Up Arrow or Down Arrow	Move the cursor from line to line in a list.
Right Arrow or Left Arrow	When editing text in a field: Move within the text in the field.
	All other conditions: Move the cursor from column to column in a list.
Page Up or Page Down	Page through a list or help window.
Home or End	Move the cursor to the top or bottom of a list.
Delete	Delete the selected characters in a field or the selected item in the scan list.
	For more information about scan lists see Scanning The Switching System
	on page 31.

Configuring The KVM Switch And The OSD

To configure the KVM switch and the OSD interface:

Start the OSD and click Setup.

The following table describes the options in the Setup window.