APC AP5610, AP5616, AP5615 manual To configure Telnet access directly to a server

Chapter 4: Network Access Software 43

Right-click on the unit. Select Properties from the pop-up menu. The

Properties dialog box appears.

c. Enable the Launch built-in application checkbox.

3.Click OK to save the settings.

To configure third party Telnet access to a server through the CPS:

1.To configure a third party Telnet application as the global default access method:

a.Select Tools - Options from the Network Access Software menu.

b.Click the Telnet tab.

c.Enable the Launch user-specified application checkbox. Enter the directory path, name and any command line arguments. For commands that do not provide a GUI, enable the Launch in command window checkbox.

d.Click OK to save the changes.

2.If the global default is set for a method other than that user-specified Telnet application, and you wish to override it for this server:

a.Select a unit from the Unit list.

b.Select View - Properties from the Network Access Software menu.

— or —

Click the Properties task button.

— or —

Right-click on the unit. Select Properties from the pop-up menu. The Properties dialog box appears.

c.Enable the Launch user-specified application checkbox and enter the directory path, name and any command line arguments. For commands that do not provide a GUI, enable the Launch in command window checkbox.

To configure Telnet access directly to a server:

NOTE: This procedure applies to Serial Console Viewer or third party Telnet access directly to a server.

1.Select View - Properties from the Network Access Software menu.

— or —

Click the Properties task button.

— or —

Right-click on the unit. Select Properties from the pop-up menu. The Properties dialog box appears.