APC AP5610, AP5616, AP5615 manual To change VNC options, To change RDP options

Chapter 4: Network Access Software 52

VNC options

Network Access Software supports a user-defined VNC viewer through the properties page. In the VNC tab you can search for a user-specific VNC application and include its command line arguments. A selection of macros is available for placement in the command line; this may be useful for automatic replacement of variables such as IP address, port number, user name and password. For VNC commands that do not provide their own GUI, such as those for computers running standard Windows, Linux and Unix operating systems, you may have the VNC application launch from within an OS command window.

To change VNC options:

1.Select Tools - Options from the Network Access Software menu. The Options dialog box appears.

2.Click the VNC tab.

3.In the Application to Launch field, enter the directory path and name or click the Browse button to locate the path and name.

4.Enter command line arguments in the box below the path and name.

— or —

To insert a predefined macro at the cursor location in the command line, click the Insert Macro list box and select a macro from the drop-down menu. Network Access Software will automatically replace these variables when the application runs.

5.Enable or disable the Launch in command window by marking or clearing the checkbox. When enabled, the user-specified VNC application will be launched from within an OS command window.

6.Click OK.

RDP options

Network Access Software supports a user-defined RDP viewer through the properties page. In the RDP tab you can search for a user-specific RDP application and you may include its command line arguments. A selection of macros is available for placement in the command line; this may be useful for automatic replacement of variables such as IP address, port number, user name and password. For RDP commands that do not provide their own GUI, such as those for computers running Windows, Linux and Unix operating systems, you can launch the RDP application from within an OS command window.

To change RDP options:

1.Select Tools - Options from the Network Access Software menu. The Options dialog box appears.

2.Click the RDP tab.