Connecting to a PC or Printer

Connecting to a PictBridge-compliant Printer

By connecting the camera directly to a printer supporting PictBridge via the USB connection cable (supplied), you can select the pictures to be printed or start printing.

DIGITAL

AV OUT

DC IN

A: USB connection cable (supplied)

B: AC adaptor (DMW-CAC2; optional)

1 Turn the camera on and then set the USB mode to [PictBridge (PTP)]. (P83)

2 Turn on the printer.

3 Connect the camera to a printer via the USB connection cable A (supplied).

Connect the USB connection cable with the [] mark facing the [1] mark on the [DIGITAL] socket.

Hold C and then insert or pull the AV cable straight.

 

When the DPOF

 

Select [DPOF

 

Print is set. (P72)

 

PICTURE]. (P89)

 

 

 

 

 

When the DPOF

 

Select [SINGLE

 

Print is not set.

 

PICTURE]. (P88)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

If the remaining battery power becomes low during communication, the status indicator turns red, starts to blink (P13) and the alarm beeps. In this case, stop the communication immediately.

Then turn the camera off and replace the battery with a charged one or charge the battery. Or, use the AC adaptor (DMW-CAC2; optional).

Set the print settings such as print quality on the printer beforehand. Ask the manufacturer of the printer about the corresponding models. (Read the printer operating instructions, too.)

It may take time to print some pictures. Therefore, we recommend using a battery with sufficient power (P13) or the AC adaptor (DMW-CAC2; optional) when you connect to a printer.

Disconnect the USB connection cable after printing.

Do not use any other USB connection cables except the supplied one.

87

Page 87
Image 87
Panasonic DMC-FX7PP, DMCFX7K operating instructions Connecting to a PictBridge-compliant Printer, PICTURE. P89, PICTURE. P88