Recording pictures (basic)

Taking Pictures using Burst Mode

1 Press the Single/Burst Mode Button to switch the burst mode setting and then take pictures.

1600

19

: High speed

;

: Low speed

;

: No limit

;

No display (canceled)

Number of pictures recorded in burst mode

Burst speed

Number of recordable

(pictures/

pictures (pictures)

second)¢

 

 

3

max. 4

max. 7

2

 

 

 

Depends on

Depends on

2

the card

the card

 

capacity

capacity

¢When the shutter speed is higher than 1/60 and the flash is not activated

In simple mode [], the burst speed is fixed to Low. (P32)

Keep pressing the shutter button fully to activate the burst mode.

If the flash is activated, you can record only 1 picture.

When the self-timer is used, the number of recordable pictures in burst mode is fixed to 3.

When the burst mode is activated, the audio recording function cannot be used.

When setting auto bracket and the burst mode simultaneously, auto bracket will be performed by default.

When the burst mode setting is set to no limit, the speed of taking pictures becomes slow during a recording in burst mode.

Burst mode will not perform as described if a MultiMediaCard is used in place of an SD Memory Card. The reading/writing speed of a MultiMediaCard is slower than that of an SD Memory Card.

The setting of auto review function is fixed to [1SEC.]. (The picture is not enlarged.)

44

Page 44
Image 44
Panasonic DMC-FX7PP, DMCFX7K Taking Pictures using Burst Mode, High speed Low speed No limit No display canceled