Panasonic DMCFX7K Or always lit on the LCD, Monitor Noise appears on, LCD monitor, Cut out

	Others
Conditions	Causes
Some pixels are inactive	This is not a malfunction.
or always lit on the LCD	These pixels do not affect the recorded pictures.
monitor.
Noise appears on the	In dark places, noise may appear to maintain the brightness
LCD monitor.	of the LCD monitor. This does not affect the pictures you are
	recording.
A vertical red spectrum	This is called smear. It is specific to CCD, not a malfunction.
appears on the LCD	It appears when the subject has a bright part. It is recorded
monitor.	on motion images, but not recorded on still pictures.
The pictures cannot be	Does the printer support PictBridge? (P87)
printed with printers.	Set the USB mode to [PictBridge (PTP)].
Both ends of the picture	When you order photo studios to print pictures, ask the photo
recorded by setting the	studio if the pictures can be printed with both ends.
picture size to [HDTV]	• When using the printer with a trimming feature or other
(1920k1080 pixels) are	feature which cuts out both edges of the pictures, cancel
cut out.	the feature for printing. The feature depends on the printer
	used.
	• Refer to the operating instructions of the printer for details.

100