QoS Commands

Command Mode

Class-map Configuration mode.

User Guidelines

There are no user guidelines for this command.

Example

The following example defines the match criterion for classifying traffic as an access group called enterprise in a class map called class1..

Console (config)# class-mapclass1

Console (config-cmap)# match access-groupenterprise

policy-map

The policy-mapGlobal Configuration mode command creates a policy map and enters the Policy-map Configuration mode. To delete a policy map, use the no form of this command.

Syntax

policy-mappolicy-map-name no policy-mappolicy-map-name

Parameters

policy-map-name— Specifies the name of the policy map.

Default Configuration

If the packet is an IP packet, the DCSP value of the policy map is 0.

If the packet is tagged, the CoS value is 0.

Command Mode

Global Configuration mode

Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide

173

Page 189
Image 189
Intel SBCEGBESW10 CLI manual Class-map Configuration mode, Policy-map-name- Specifies the name of the policy map