Intel SBCEGBESW10 CLI manual Bridge multicast address, No multicast addresses are defined

Address Table Commands

bridge multicast address

The bridge multicast address Interface Configuration (VLAN) mode command registers a MAC-layer multicast address in the bridge table and statically adds ports to the group. To unregister the MAC address, use the no form of this command.

Syntax

bridge multicast address {mac-multicast-address ip-multicast-address}

bridge multicast address {mac-multicast-address ip-multicast-address} [add remove] {ethernet interface-list port-channel port-channel-number-list}

no bridge multicast address {mac-multicast-address ip-multicast-address}

Parameters

•add — Adds ports to the group. If no option is specified, this is the default option.

•remove — Removes ports from the group.

•mac-multicast-address — A valid MAC multicast address.

•ip- multicast-address — A valid IP multicast address.

•interface-list — Separate nonconsecutive Ethernet ports with a comma and no spaces; a hyphen is used to designate a range of ports.

•port-channel-number-list — Separate nonconsecutive port-channels with a comma and no spaces; a hyphen is used to designate a range of ports.

Default Configuration

No multicast addresses are defined.

Command Mode

Interface Configuration (VLAN) mode

User Guidelines

If the command is executed without add or remove, the command only registers the group in the bridge database.

Static multicast addresses can only be defined on static VLANs.

Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 23