Intel SBCEGBESW10 CLI manual Spanning-tree pathcost method, Short path cost method

Spanning-Tree Commands

User Guidelines

There are no user guidelines for this command.

Example

The following example enables shared spanning-tree on Ethernet port 15.

Console(config)# interface ethernet ext.15

Console(config-if)#spanning-tree link-type shared

spanning-tree pathcost method

The spanning-tree pathcost method Global Configuration mode command sets the default path cost method. To return to the default configuration, use the no form of this command.

Syntax

spanning-tree pathcost method {long short}

no spanning-tree pathcost method

Parameters

•long — Specifies port path costs with a range of 1-200,000,000 .

•short — Specifies port path costs with a range of 0-65,535.

Default Configuration

Short path cost method.

Command Mode

Global Configuration mode

User Guidelines

This command is only operational with the device in Interface mode.

This command applies to all spanning tree instances on the device.

The cost is set using the spanning-tree cost command.

268Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide