Intel SBCEGBESW1 No snmp-server group groupname v1 v2 v3 noauth auth priv, No group entry exists

SNMP Commands

no snmp-server group groupname {v1 v2 v3 [noauth auth priv]}

Parameters

•groupname—Specifies the name of the group (Range: 1-30 characters).

•v1 — Indicates the SNMP Version 1 security model.

•v2 — Indicates the SNMP Version 2 security model.

•v3 — Indicates the SNMP Version 3 security model.

•noauth — Indicates no authentication of a packet. Applicable only to the SNMP Version 3 security model.

•auth — Indicates authentication of a packet without encrypting it. Applicable only to the SNMP Version 3 security model.

•priv — Indicates authentication of a packet with encryption. Applicable only to the SNMP Version 3 security model.

•name — Specifies the context of a packet. The following context is supported: Router. If the context name is unspecified, all contexts are defined.

•readview — Specifies a string that is the name of the view that enables only viewing the contents of the agent. If unspecified, all objects except for the community-table and SNMPv3 user and access tables are available.

•writeview — Specifies a string that is the name of the view that enables entering data and configuring the contents of the agent. If unspecified, nothing is defined for the write view.

•notifyview — Specifies a string that is the name of the view that enables specifying an inform or a trap. If unspecified, nothing is defined for the notify view. Applicable only to the SNMP Version 3 security model.

Default Configuration

No group entry exists.

Command Mode

Global Configuration mode

User Guidelines

There are no user guidelines for this command.

240Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide