PHY Diagnostics Commands

show copper-ports tdr

The show copper-ports tdr User EXEC mode command displays information on the last Time Domain Reflectometry (TDR) test performed on copper ports.

Syntax

show copper-ports tdr [interface]

Parameters

interface — A valid Ethernet port. (Full syntax: unit/port)

Default Configuration

This command has no default configuration.

Command Mode

User EXEC mode

User Guidelines

The maximum length of the cable for the TDR test is 120 meters.

Example

The following example displays information on the last TDR test performed on all copper ports.

Console> show copper-ports tdr

 

Port

Result

Length [meters]

Date

----

------

---------------

----

1

OK

 

 

2

Short

50

13:32:00 23 July 2005

3

Test has not been performed

 

4

Open

64

13:32:00 23 July 2005

5

Fiber

-

-

 

 

 

 

154Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide

Page 170
Image 170
Intel SBCEGBESW10 CLI manual Show copper-ports tdr interface, User Exec mode, Console show copper-ports tdr