RADIUS Commands

User Guidelines

There are no user guidelines for this command.

Example

The following example configures the number of times the software searches all RADIUS server hosts to 5 times.

console(config)# radius-server retransmit 5

radius-server source-ip

The radius-serversource-ipGlobal Configuration mode command specifies the source IP address used for communication with RADIUS servers. To restore the default configuration, use the no form of this command.

Syntax

radius-server source-ip source no radius-source-ip source

Parameters

source — Specifies a valid source IP address.

Default Configuration

The source IP address is the IP address of the outgoing IP interface.

Command Mode

Global Configuration mode

User Guidelines

There are no user guidelines for this command.

218Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide

Page 234
Image 234
Intel SBCEGBESW10 CLI manual Radius-server source-ip, Source Specifies a valid source IP address