Extron electronic ISM 824 manual Auto Image, Auto Memory, Reconfig

SIS™ Programming and Control, cont’d

X@VszX! *X1&]

A front panel vertical size adjustment has occurred. X! is the input, X@ is the output, and X1& is the size variable.

X@HphX! *X1^]

A front panel horizontal centering adjustment has occurred. X! is the input, X@ is the output, and X1^ is the centering variable.

X@VphX! *X1^]

A front panel vertical centering adjustment has occurred. X! is the input, X@ is the output, and X1^ is the centering variable.

X@PhsX!*X^]

A front panel pixel phase adjustment has occurred. X! is the input, X@ is the output, and X^ is the pixel phase variable.

X@DetX! *X1%]

A front panel horizontal detail filter adjustment has occurred on the input X! switched to output X@. X1% is the filter variable (1 to 255 for Universal Scaler; 1 to 63 for Video Scaler).

X@BluX1)]

The blue-only mode has been turned on or off from the front panel for one or both outputs. X1) is the on/off status for the two outputs.

RGB delay

X@DlyX3&]

A front panel RGB delay adjustment has occurred. RGB delay affects input selections for the preview output only. X3& is the delay value, in 0.1 second steps, X@ is the output. X3& can be as much as 50 = 5.0 seconds.

Test pattern

X@TstX2)]

A test pattern has been turned on or off from the front panel for one or both outputs. X2) is the test pattern selected, X@ is the output.

Audio gain and attenuation

InX!•AudX3!]

A front panel audio input level adjustment has occurred. X! is input, and X3! is the audio gain or attenuation level.

Auto Image

X@ImgX!*X1)]

The Auto Image feature has been turned on or off from the front panel for all input selections. X! is input, X@ is the output, and X1) is the on/off status.

Auto Memory

X@AutX1)]

The auto memory feature has been turned on or off from the front panel for all input selections. X1) is the on/off status, X@ is the output.

Reconfig

ReconfigX@ ]

The input to output X@ has changed.

4-6 ISM 824 Integration Scaling Multiswitcher • SIS™ Programming and Control