Extron electronic ISM 824 manual Advanced Config submenu, Split Color Bars, Split Grayscale

Operation and Setup, cont’d

Advanced Config submenu

Within this submenu auto image can be turned on or off, test patterns can be selected. In addition, blue mode, auto memory, film mode, and RGB passthrough can be all turned on or off separately.

1. From the User Presets submenu, press Menu to enter the Advanced Config. submenu.

2.Press Next to go to the Auto Image menu. Auto Image can be turned on or off for any input from this menu. Default setting is off.

Rotate the left front panel encoder ([) to select the input, and rotate the right encoder ({) to turn auto imaging on or off.

3.	Press Next to go to the Test Pattern menu. From this menu one of the
	following test patterns can be selected:
	None (default)
	Split Color Bars (8)
	Crosshatch 4:3/16:9
	Crosshatch 4x4	Split Color Bars (8)			Crosshatch	Crosshatch 4x4			Split Grayscale
	Split Grayscale
	Ramp
	Alternating Pixels
	Crop		Ramp		Alt Pixels		Crop	1.33 Aspect Ratio
	1.33 Aspect ratio
	1.78 Aspect ratio
	1.85 Aspect ratio
	2.35 Aspect ratio	1.78 Aspect Ratio		1.85 Aspect Ratio		2.35 Aspect Ratio
	Rotate either front panel encoder to select the test pattern. The selection
	becomes active on the display device, regardless of the current input/output
	signal. Default setting is None.
4.	Press Next to go to the Blue Mode menu. Blue Mode can be turned on or off
	from this menu. Default setting is off
	Rotate either front panel encoder to tun the blue mode on or off. When turned
	on, only sync and the blue video signals are displayed.
5.	Press Next to go to the Auto Memories menu. Auto Memories can be turned
	on or off from this menu. Default setting is on.
	Rotate either front panel encoder to tun the auto memory on or off
6.	Press Next to go to the Film Mode menu. Film Mode can be turned on or off
	from this menu. Default setting is On.
	Rotate either front panel encoder to turn the Film mode on or off.
7.	Press Next to go to the RGB pass through menu. RGB signals are passed
	through unprocessed when this setting is turned On. Default setting is Off.
	Rotate either front panel encoder to turn RGB Pass through on or off.
8.	Press Next to return back to the Advanced Config. menu.
9.	Press Menu twice to go to the next top level menu, View Comm Settings

3-36 ISM 824 Integration Scaling Multiswitcher • Operation and Setup