Extron electronic ISM 824 manual ZpgX4, ZpxX5, @*X$ @%2AX$ @HstX!*X$, @*X% @%2AX% @VstX!*X%, @ U

4-14

Command/response table for SIS commands (continued)

Command	ASCII (Telnet)	URL Encoded (Web)	Response	Additional description
	(host to switcher)	(host to switcher)	(switcher to host)

SIS™

ISM 824 Integration Scaling

Resets

Reset an individual I/O preset Reset all I/O presets

Reset audio input levels

Reset all mutes

System reset

Individual board reset

Esc X4(ZG}	WX4( ZG	ZpgX4(]
Esc ZG}	WZG	Zpg00]
Esc ZA}	W ZA	Zpa]
Esc ZZ}	WZZ	Zpz]
Esc ZXXX}	W ZXXX	Zpx]
Esc X5) ZX}	W X5) ZX	ZpxX5)]

Universal Scaler (ISM RGB) Output

Clear global I/O preset X4(. Clear all global I/O preset. Reset all audio input levels

(gain and attenuation) to 0 dB.

Reset all video and audio mutes.

Reset factory defaults. Reset individual card.

Programming

Multiswitcher • SIS™ Programming and Control

Input sampling

Horizontal start

Specify a value	X@*X$ )	X@%2AX$ )	X@HstX!*X$]	Specify the horizontal location
				of first active pixel.
Increment value	X@+)	X@+)	X@HstX!*X$]	Increase the value.
Decrement value	X@-)	X@-)	X@HstX!*X$]	Decrease the value.
View	X@)	X@)	X$]	Show the horizontal location of
				first active pixel.
Vertical start
Specify a value	X@*X% (	X@%2AX% (	X@VstX!*X%]	Specify the vertical location of
				first active line.
Increment value	X@+(	X@+(	X@VstX!*X%]	Increase the value.
Decrement value	X@-(	X@-(	X@VstX!*X%]	Decrease the value.
View	X@(	X@(	X%]	Show the vertical location of
				first active line.

Pixel phase (available only for RGB, YUV-HD, and YUVp input signals)

Specify a value	X@*X^ U	X@%2AX^ U	X@PhsX!*X^]	Adjust the pixel phase to a
				specified value.
Increment value	X@+U	X@+U	X@PhsX!*X^]	Increase the value.
Decrement value	X@-U	X@-U	X@PhsX!*X^]	Decrease the value.
View	X@U	X@U	X^]	Show the pixel phase.

Total pixels (available only for RGB, YUV-HD, and YUVp input signals)

Specify a value	11*X@*X& #	11%2AX@%2AX& #	X@TpxX!*X&]	Adjust the total pixels to a
				specified value.
Increment value	11*X@+#	11%2AX@+#	X@TpxX!*X&]	Increase the value.
Decrement value	11*X@-#	11%2AX@-#	X@TpxX!*X&]	Decrease the value.
View	11*X@#	11%2AX@#	X&]	Show the total pixels.

and Control, cont’d