Extron electronic ISM 824 manual Data tracer window

•Data Tracer — Selecting this opens a small window in which the transmit and receive (Tx/Rx) data between the control software on the host PC and the ISM 824 can be viewed in ASCII format (see figure 5-8). During data transmission and receipt, the data tracer widow is constantly updated. To close the window click Close or the X in the window’s top right corner.

Figure 5-8 — Data tracer window

•Device Images — Selecting this opens a small window with device icons which are useful in identifying the input sources and output devices used. To use, drag suitable icons from the window and drop them onto the input or output buttons on the I/O Control page (see figure 5-9) To close the window click on the X in the window’s top right corner.

Figure 5-9 — Device image window and I/O buttons with icons in place

To replace any device icon with another, right click on the icon to be replaced.

A small text window appears. Click on “Changes Device Image”. This opens the Device Image window. Drag the new icon onto the button.

To remove an icon from a button, right click on the icon to be removed. A small text window appears. Click on “Remove Device Image”. This removes the device image icon from the button.

ISM 824 Integration Scaling Multiswitcher • ISM 824 Multiswitcher Software 5-7