Extron electronic ISM 824 manual Executive Mode 2 initiation and exit method

Operation and Setup, cont’d

•Executive Mode 2 — I/O ties only. In this mode partial front panel lockout is achieved, allowing ties to be changed, I/O presets recalled, button background illumination control, and audio gain/attenuation control. Attempting other changes result in the I/O buttons and the Enter button blinking twice.

To initiate Executive Mode 2 via the front panel, press and hold the Enter, Video, and Audio buttons together for 2 seconds. The I/O buttons and the Enter button blink twice. The I/O buttons remains lit, the Enter button extinguishes, and the LCD displays Executive Mode I/O Ties Only. Release the buttons.

To exit Executive Mode 2, press and hold the Enter, Video, and Audio buttons together for 2 seconds. The I/O buttons and the Enter button blink twice. The I/O buttons remains lit, the Enter button extinguishes, and the LCD displays Executive Mode Off. Release the buttons.

Executive Mode 2.

To initiate:

Press and hold the Enter, Video, and Audio buttons together for 2 seconds, until the three buttons blink twice.

	C O N T R O L				I / O
ENTER	PRESET	VIEW	ESC	VIDEO	AUDIO

Executive Mode

I/O Ties Only

Executive Mode 2.

To exit:

Press and hold the Enter, Video, and Audio buttons together for 2 seconds, until the three buttons blink twice.

	C O N T R O L				I / O
ENTER	PRESET	VIEW	ESC	VIDEO	AUDIO

Executive Mode

Off

Default	Default
Cycle	Cycle

Figure 3-40 — Executive Mode 2 initiation and exit method

3-28 ISM 824 Integration Scaling Multiswitcher • Operation and Setup