Extron electronic ISM 824 manual OUT #3 RGB Delay, Changing the RGB delay

Models: ISM 824

1 166
Download 166 pages 4.54 Kb
Page 49
Image 49

4. Press the Video button to exit RGB delay mode. The Video button ceases flashing, and remains lit green, and the Audio button lights red. The View, Esc, and output buttons extinguish.

NAlternatively, pressing Enter or Preset exits the RGB delay mode.

Changing the RGB delay

To change the RGB delay, do the following:

1. Press Esc to clear all pending changes and reset the LCD.

2. Press and hold the Video button for 3 seconds, until it flashes green. The View, Esc, and one output button lights green, and the LCD shows the RGB delay for the indicated (lit) output.

NThe output button that lights is the last output button pressed in the previous front panel operation made just prior to this RGB viewing.

3. Select the desired output button, and observe the LCD screen.

4. Use the View and Esc buttons to increase or decrease the RGB delay in 0.1 second steps until the desired setting is reached (see figure 3-24).

NAlternatively, either of the front panel encoders can be used to increase or decrease the RGB delay to the desired setting (see figure 3-24).

Step 4.

 

 

Press the Esc button

 

Press the View button to

to increase the RGB delay by

or

decrease the RGB delay by

0.1 second increments.

 

0.1 second decrements.

ENTER PRESET

VIEW

ESC

ENTER PRESET

VIEW

ESC

Alternatively, rotate either of the front panel

ADJUST

encoders to increase or decrease the

 

RGB delay by 0.1 second intervals.

 

OUT #3 RGB DELAY

1.2 SECONDS

NThe LCD shows the new RGB delay setting for the selected output.

Figure 3-24 — Steps 4 for setting the RGB delay

5. Press the Video button to exit the RGB delay display and adjust mode. The Video button ceases flashing, and remains lit green. The Audio button lights red, and the View, Esc, and output buttons extinguish. The LCD resets.

NThe RGB interval is stored in non-volatile memory. When power is removed and restored, the RGB delay settings are retained.

ISM 824 Integration Scaling Multiswitcher • Operation and Setup 3-17

Page 49
Image 49
Extron electronic ISM 824 manual OUT #3 RGB Delay, Changing the RGB delay