Yamaha RX-V3800 Muting the audio output, Using the sleep timer, 43 En, S L E E P 1 2 0 m i n

Muting the audio output

Press EMUTE on the remote control to mute the audio output. Press EMUTE again to resume the audio output.

y

•You can also rotate RVOLUME on the front panel or press CVOLUME +/– on the remote control to resume the audio output.

•You can adjust the muting level by using the “Muting Type” parameter in “Volume” (see page 84).

•The MUTE indicator flashes in the front panel display when the audio output is muted and disappears from the front panel display when the audio output is resumed.

Playing video sources in the background of an audio source

You can combine a video image from a video source with sound from an audio source. For example, you can enjoy listening to classical music while viewing beautiful scenery from the video source on the video monitor.

Press the input selector buttons (1) to select a video source and then an audio source.

y

Set the “BGV” parameter in the “MULTI CH” menu to the desired setting to select the default background video input source of the MULTI CH INPUT sources (see page 83).

Using the sleep timer

Use this feature to automatically set the main zone to the standby mode after a certain amount of time. The sleep timer is useful when you are going to sleep while this unit is playing or recording a source. The sleep timer also automatically turns off any external components connected to the AC OUTLET(S) (see page 32).

1Rotate the CINPUT selector (or press one of the input selector buttons (1)) to select the desired input source.

2Start playback on the selected source component or select a broadcast station.

Refer to the operating instructions for the source component.

See page 53 for details about tuning instructions.

Playback

3Press MSLEEP (or ASLEEP) repeatedly to set the amount of time.

Each time you press MSLEEP (or ASLEEP), the front panel display changes as shown below.

SLEEP 120min. SLEEP 90min.

SLEEP OFF SLEEP 30min. SLEEP 60min.

The SLEEP indicator flashes while you are switching the amount of time for the sleep timer. Once the sleep timer is set, the SLEEP indicator lights up in the front panel display, and the display returns to the selected sound field program.

S L E E P 1 2 0 m i n .

SLEEP

Flashes

S T R A I G H T

SLEEP

Lights up

■Canceling the sleep timer

Press MSLEEP (or ASLEEP) repeatedly until “SLEEP OFF” appears in the front panel display.

S L E E P O F F

Disappears

The SLEEP indicator turns off, and “SLEEP OFF” disappears from the front panel display after a few seconds.

y

The sleep timer setting can also be canceled by pressing BMAIN ZONE ON/OFF (or 8STANDBY) to set the main zone to the standby mode.

OPERATION BASIC

English

43 En