Manuals / Yamaha / Home Audio / Stereo Receiver

Yamaha RX-V3800 Setting remote control codes, 107 En, Selecting a component to be controlled

Models: RX-V3800

1 169

Download 169 pages 61.75 Kb

Page 111

■Selecting a component to be controlled

You can select a component to be controlled independently of the input source selected with the input selector buttons.

Press BSELECT k / n repeatedly to select the desired component.

The name of the component to be controlled appears in the display window (B) on the remote control.

■Controlling optional components

(Option mode)

“OPTN” is an optional component control area that can be programmed with remote control functions independently from any input source. This area is useful for programming commands that are to be used only as a part of a macro function or for components that do not have a valid remote control code.

To select the option mode, press BSELECT n repeatedly until “OPTN” appears in the display window (B) on the remote control.

Note

You cannot set a remote control code for the optional area. See page 109 to program buttons operated within this component control area.

Remote control features

Setting remote control codes

You can control other components by setting the appropriate remote control codes. Codes can be set up for each input area. For a complete list of available remote control codes, refer to “List of remote control codes” at the end of this manual.

The following table shows the default component (Library: component category) and the remote control code for each input area.

Remote control code default settings

		Library		Default
	Input area	(component	Manufacturer	Default
	Input area	(component	Manufacturer	code
		category)		code
		category)

	XM	TUNER	Yamaha	2604

	NET/USB	TUNER	Yamaha	2607

	TUNER	TUNER	Yamaha	2602

	CD	CD	Yamaha	2300

	CD-R	CD-R	Yamaha	2400

	MULTI CH	DVD	Yamaha	2100
	IN	DVD	Yamaha	2100
	IN

	MD/TAPE	MD	Yamaha	2500

	DVD	DVD	Yamaha	2100

	BD/HD DVD	DVD	Yamaha	2100

	PHONO	TV	—	—

	DTV/CBL	TV	—	—

	DVR	DVR	Yamaha	2807

	VCR	VCR	—	—

	V-AUX/	TUNER	Yamaha	2606
	DOCK	TUNER	Yamaha	2606
	DOCK

Note

You may not be able to operate your Yamaha component even if a Yamaha remote control code is preset as listed above. In this case, try setting another Yamaha remote control code.

OPERATION	ADVANCED

English

107 En

Image 111

Yamaha RX-V3800 owner manual Setting remote control codes, 107 En, Selecting a component to be controlled

Contents

AV Receiver RX-V3800Important safety instructions Caution-i En1 IMPORTANT NOTICE DO NOT MODIFY THIS UNIT Note to CATV system installerFCC INFORMATION for US customers Caution-ii EnFOR CANADIAN CUSTOMERS COMPLIANCE INFORMATION STATEMENT DECLARATION OF CONFORMITY PROCEDURECaution read this before operating your unit Caution-iii EnContents 1 Enat the end of this manual About this manual Notices2 En We Want You Listening For A LifetimeUSB features FeaturesBuilt-in 7-channel power amplifier Network featuresSupplied accessories 4 EnFeatures 1 Take off the battery compartment cover Installing batteries in the remote controlInstalling batteries in the Zone 2/Zone 3 remote control 1 Press the part and slide the battery compartment cover offQuick start guide Step 1 Set up your speakersStep 3 Turn on the power and start playback AM loop antenna Indoor FM antenna Power cableFront speakers and center speaker 7 En1 Place your speakers and subwoofer in the room 2 Connect speaker cables to each speakerMONITOR OUT jack of this unit and the video Step 2 Connect your DVD player and other components8 En 3 Connect the video cable to the VIDEOGeneral connection information Connecting the wire of the AM loop antenna9 En For further connections10 En Step 3 Turn on the power and start playbackAfter using this unit 5 Rotate RVOLUME to adjust the volumeAdjusting the parameters of this unit Using various input sourcesManually adjusting various parameters Using various sound featuresA TRIGGER OUT jack ConnectionsRear panel 12 EnSpeaker indications Placing speakers13 En 7.1-channel speaker layoutFront left and right speakers Center speaker 14 En6.1-channel speaker layout 5.1-channel speaker layoutConnecting speakers For the 7.1-channel speaker setting15 En For the 6.1-channel speaker setting For the 5.1-channel speaker setting16 En Speaker indications Using presence speakersConnecting presence left and right speakers 17 En3 Insert one bare wire into the hole on the side of each terminal Connecting the speaker cableConnecting to the SP2 speaker terminals 2 Loosen the knob using the supplied speaker terminal wrench19 En Connecting the banana plug except U.K., Europe, Asia and Korea modelsUsing bi-amplification connections 1 Tighten the knob using the supplied speaker terminal wrenchVideo jacks Information on jacks and cable plugs20 En Audio jacksHDMI jack and cable plug Default input assignment of HDMI input jacksInformation on HDMI 21 En22 En Audio and video signal flowAudio signal flow Video signal flow23 En Connecting a TV monitor or projectorConnecting other components Connecting a Blu-ray Disc or HD DVD player24 En Connecting a DVD player 25 EnConnections Connecting a set-top box Connecting a DVD recorder, PVR or VCR26 En 27 En Connecting audio components2 FRONT PRE OUT jacks Connecting an external amplifier28 En 1 CENTER PRE OUT jackFor 8-channel input Connecting a multi-format player or an external decoder29 En For 6-channel input30 En Using the VIDEO AUX jacks on the front panelConnecting a Yamaha iPod universal dock Using REMOTE IN/OUT jacks31 En Connecting the networkAC OUTLETS SWITCHED Connecting the FM and AM antennasConnecting the power cable Connecting the AC power cableTurning this unit on and off Setting the speaker impedance and GUI languagePress BMAIN ZONE ON/OFF or 9POWER to If there are some problems34 En Using the remote controlTransmit indicator P Opening and closing the front panel door3 DOCK indicator 1 RECOUT indicator9 Input channel and speaker indicators 2 HDMI indicatorAUTO indicator 0 Tuner indicatorsTUNED indicator STEREO indicator37 En Optimizing the speaker setting for your listening room YPAOUsing the automatic setup Auto Setup Basic procedure of the automatic setupnormal listening position on a flat level 4 Press 4ENTER to start the setup procedure38 En 3 Place the optimizer microphone at your39 En 2 Press 4k to select “Setup Menu” and thenWiring Speaker wiring Level Volume level40 En Reviewing the result of the automatic setupSystem Memory feature 2 Press 4k / n repeatedly and then 4h to select “Auto Setup”D V D Basic procedurePlayback 41 EnSelecting the MULTI CH INPUT component Using your headphonesinput jack select setting Selecting audio input jacks AUDIO SELECTPlaying video sources in the background of an audio source Using the sleep timerCanceling the sleep timer Muting the audio outputBasic controls in the GUI screen feature44 En Items in GUI screenSelecting sound field programs Sound field indicatorsSound field programs Sound field program descriptionsHiFi DSP 46 EnFor audio music sources HiFi DSPThe Roxy Theatre 47 EnFor various sources LIVE/CLUB48 En For visual sources of musicFor movie sources MOVIE 49 EnStereo playback The Compressed Music EnhancerSTRAIGHT Using CINEMA DSP 3D modeUsing sound field programs without surround speakers Enjoying unprocessed input sources51 En Using audio featuresAdjusting the tonal quality Enjoying pure hi-fi soundEnjoying multi-channel sources in 2-channel stereo Adjusting the speaker level2 Press 4l / h to adjust the speaker output level Press OSTEREO on the remote control repeatedly to select “2ch Stereo”4 Press HPRESET/TUNING/CH l / h once to begin automatic tuning FM/AM tuningAutomatic tuning Manual tuningA 1 F M 8 8 . 9 M H z Automatic preset tuningManual preset tuning 54 En2 Press HPRESET/TUNING/CH l / h or Selecting preset stationsExchanging preset stations 5 Press KMEMORY while the MEMORY indicator is flashing56 En XM Satellite Radio tuningConnecting the XM Mini-Tuner Home Dock Enjoying XM HD Surround content57 En Subscription of your XM Satellite Radio serviceActivating XM Satellite Radio Basic XM Satellite Radio operations1 Press ISEARCH MODE or GSRCH MODE repeatedly to select “PRESET Preset Search modeDirect Number Access mode 3 Press HPRESET/TUNING/CH l / h orX M 1 2 Setting the XM Satellite Radio preset channels59 En X M - 1 0 4 3 X M UWhen the artist name / song title is displayed 4 Press HPRESET/TUNING/CH l / h orWhen the channel number / name is displayed When the channel category is displayed61 En Displaying the XM Satellite Radio information on the video monitorPress LDISPLAY or JDISPLAY 62 En Using iPodRemote control operation Controlling iPodplayback of the selected song 1 Press JDISPLAY on the remote control63 En The functions of the play information displayUsing Network/USB features Navigating the network and USB menus64 En 65 En 2 Press JDISPLAY to display the top NET/ USB menuRemote control operation 66 En Using a PC server or Yamaha MCX-2000Installing Windows Media Player 11 on your PC 1 Install Windows Media Player 11 on your PCRegistering this unit on the Yamaha MCX-2000 Using the Internet Radio2 Set your YAMAHA MCX-2000 to the “Auto Config” mode 67 En68 En Using shortcut buttonsUsing a USB memory device or a USB portable audio player Connecting a USB memory device or a USB potable audio player1 P C / M C Select an item by using numeric buttons 1-85 Press 4ENTER or 5MEMORY to confirm the preset 69 En5 Start recording on the recording component Recording70 En 1 Turn on all the connected components71 En Advanced sound configurationsremote control to select the surround decode mode Selecting decoders72 En Selecting decoders used with sound field programsAvailable decoders Decoder Type Volume Volume menu Manual Setup Manual setup menuAuto Setup Automatic setup menu Signal Info. Signal information74 En Basic configuration of sound field programs6 Press 4h and then press 4l / h to adjust the selected parameter Stereo/Surround Stereo/Surround menu75 En Adjusting the vertical dialogue position Dialogue LiftDecoder Type Init. Delay Sur. Init. Delay SB. Init. Delay76 En Sound field parameter descriptions77 En Liveness Sur. Liveness SB. LivenessRev. Time Rev. Delay 78 EnRev. Level Direct 79 EnStereo program parameter descriptions Compressed Music Enhancer mode parameter descriptionsInitialize Program parameters initialization Dimension80 En Decoder parameter descriptionsAntenna Level Antenna level U.S.A. and Canada models only access and adjustInput Select 81 EnAudio Select Audio input jack select Volume Trim Volume trimming82 En I/O Assignment Input/output assignmentBGV Back ground video 83 EnRename Rename Multi CH Assign Multi channel assignment84 En Manual Setup VolumeMax Volume Maximum volume Initial Volume Initial volume85 En Manual Setup SoundHeadphones Headphone low-frequency effect level Headphones Headphone dynamic range86 En 2 Press 4h to access the settings window4ENTER to access the edit window 6 Select “EXIT” and press 4ENTER to exit the settings windowLipsync Audio and video synchronization Auto Automatic audio delay adjustmentManual Manual audio delay adjustment 87 EnChannel Mute Channel mute Each speaker settings88 En EXTD Surround Extended surroundComponent I/P Component interlace progressive conversion Manual Setup Video89 En Conversion Video conversionShort Message Short message display HDMI Resolution HDMI video signal resolution90 En HDMI Aspect HDMI aspect ratio91 En Manual Setup BasicSpeaker Set Speaker settings control 2 Press 4k / n to select “Manual Setup” and then press 4hFront Front speakers LFE signals output92 En Measure for the speaker sizeSpeaker Distance Speaker distance Low-frequency signals outputSWFR Phase Subwoofer phase 93 EnDefault Gateway Default gateway Manual Setup NET/USBNetwork Network settings DHCP DHCP settingMAC Address MAC Media Access Control address Procedure of the network configuration6 Press 4ENTER to confirm the setting of the parameter 7 Repeat steps 4 through 6 to configure each network parameter96 En Manual Setup OptionFront Panel Disp Front panel display setting iPod iPod settingsZone2 Initial Vol./Zone3 Initial Vol. Zone 2/Zone 3 Initial volume Zone2 Set/Zone3 Set Zone 2/Zone 3 settingZone2 Volume/Zone3 Volume Zone 2/Zone 3 volume Zone2 Max Vol./Zone3 Max Vol. Zone 2/Zone 3 Maximum volumeEXTD Surround Default Extended surround setting Signal Info Input signal informationAudio Select Default audio input jack select Decoder Mode Default decoder modeVideo Info. Video information Language99 En Audio Info. Audio information100 En Saving and recalling the system settings System MemorySaving the current system settings 1 Press GSET MENU on the remote control6 Press GSET MENU again to exit from GUI screen Loading the stored system settings101 En Loading by the NSYSTEM MEMORY buttons2 Perform the automatic setup Using examplesautomatic setup and manual setup Saving each setting2 Press and hold NSYSTEM MEMORY 1 for 4 seconds Example 2 Switching the settings for different room environmentsExample 3 Saving the sound configurations for specific sources 103 En5 Press and hold NSYSTEM MEMORY 2 for 4 seconds Example 4 Switching multiple audio and video synchronization settings4 Adjust “Manual” in “Lipsync” appropriately 104 EnControlling this unit Remote control featuresControlling this unit, a TV, or other components 105 EnControlling other components 106 EnSelecting a component to be controlled Setting remote control codesRemote control code default settings 107 En3 Press 4ENTER 6 Press MLEARN again to exit from the setup mode108 En 1 Set the operation mode selector to4 Press the button for which you want to program the new function Programming codes from other remote controls3 Press MLEARN using a ballpoint pen or similar object 109 En6 Press MLEARN again to exit the learning mode 2 Press MRENAME using a ballpoint pen or similar objectChanging source names in the display window 110 En3 Press 4k / n to select and enter a character Macro programming features111 En MACRO operations112 En Default macro functions3 Press the buttons for the functions you want MACRO using113 En Programming macro operationsClearing function sets Clearing configurationsusing a ballpoint pen or similar object 114 Enthe function you want to clear 2 Press MLEARN using a ballpoint pen or similar object115 En Clearing a learned functiona ballpoint pen or similar object 116 EnClearing a macro function 3 Press MMACRO again to exit the macro programming mode117 En Using multi-zone configurationConnecting the Zone 2 and Zone 3 components Using external amplifiers118 En Using the internal amplifiers of this unitImportant safety notice Controlling Zone 2 or ZoneSelecting the input source of Zone 2 or Zone Turning on or off Zone 2 and/or Zone using the remote controlRemote control operations 119 EnUsing Zone 2/Zone 3 remote control Adjusting the volume level of Zone 2 or ZoneAdjusting the balance of the speaker level in Zone 2 or Zone Adjusting the tonal quality of Zone 2 or ZoneControlling the XM Satellite Radio tuning function see page B VOLUME +G ZONE 2/ZONE 3 switch 3 PRESET k / nSpeaker impedance SPEAKER IMP Advanced setupUsing the advanced setup menu 122 En123 En Wake on RS-232C accessRemote control AMP ID Setting remote control AMP ID code6 Press MLEARN again to exit from the setup mode Remote control TUNER IDSetting remote control TUNER ID 124 En125 En Remote control XM ID RC XM ID U.S.A. and Canada models onlySetting remote control XM ID remote control to select the XM to change the remote control IDTuner frequency step TUNER FRQ STEP Asia and General models only Bi-amplifier setting BI-AMPCANCEL 126 EnTroubleshooting 127 EnGeneral Troubleshooting 128 EnEnglish 129 EnINFORMATION ADDITIONAL130 En TunerXM Satellite Radio U.S.A. and Canada models only Remote control 131 EnHDMI Network and USB 132 EnEnglish 133 EnINFORMATION ADDITIONALCause 134 EnAccess error Status messageiPod Auto SetupBefore Auto Setup 135 EnDuring Auto Setup After Auto Setup136 En I N I T I A L I Z E C A N C E L Resetting the system137 En I N I T I A L I Z E A L L138 En Component video signalComposite video signal GlossaryDolby Surround 139 EnDolby Digital Plus Dolby Pro LogicDTS-HD Master Audio DTS-HD High Resolution Audio140 En DTS ExpressPCM Linear PCM S-video signal141 En Neural-THX SurroundCINEMA DSP Sound field program information142 En Elements of a sound fieldQ factor Parametric equalizer information143 En FrequencyVIDEO SECTION Specifications144 En AUDIO SECTIONVideo signal format HDMI signal compatibilityAudio signals Video signals146 En NumericsIndex 147 En 148 En 149 En Page Page 5-channel Speaker settingsSound output in each sound field program 7-channelInput audio source neural ON or discrete 6.1/7.1-channel audio signals are inputneural OFF PR/SBGNU GENERAL PUBLIC LICENSE GPL/LGPLGNU LESSER GENERAL PUBLIC LICENSE END OF TERMS AND CONDITIONSIn other cases, permission to use a particular library in non-free programs enables a greater number of people to use a large body of free software. For example, permission to use the GNU C Library in non-free programs enables many more people to use the whole GNU operating system, as well as its variant, the GNU/Linux operating system 11. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason not limited to patent issues, conditions are imposed on you whether by court order, agreement or otherwise that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Library at all. For example, if a patent license would not permit royalty-free redistribution of the Library by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Library viiiDVD PLAYER List of remote control codesCABLE CD RECORDERTAPE DECK SATELLITE TUNERAPPENDIX CONTEC APPENDIX PILOT xiiiPrinted in Malaysia WK694702007 All rights reserved Front panel/Face avant A B C D E F G H I J K L M NRX-V3800 Printed in Malaysia WK69550 Remote control/Boîtier de télécommande