Yamaha RX-V3800 126 En, Tuner frequency step TUNER FRQ STEP Asia and General models only, Cancel

Advanced setup

■ Tuner frequency step TUNER FRQ STEP

(Asia and General models only)

Use this feature to set the tuner frequency step according to the frequency spacing in your area.

Choices: AM10/FM100, AM9/FM50

•Select “AM10/FM100” for North, Central and South America.

•Select “AM9/FM50” for all other areas.

■Bi-amplifier setting BI-AMP

Use this feature to activate or deactivate the bi-amplifier function.

Choices: ON, OFF

•Select “ON” if you want to activate the bi-amplifier function.

•Select “OFF” if you want to deactivate the bi-amplifier function.

Note

When “BI-AMP” is set to “ON”, the SURROUND BACK terminals cannot be used to connect surround back speakers in that the SURROUND BACK terminals are already used for the bi-amplifier connection (see page 19).

■Parameter initialization INITIALIZE

Use this feature to reset the parameters of this unit to the initial factory settings. You can select the category of parameters to be initialized.

Choices:DSP PARAM, VIDEO, NETWORK, ALL,

CANCEL

• Select “DSP PARAM” to initialize all the parameters of the sound field parameters (see page 74).

• Select “VIDEO” except “Short Message” and “On Screen” (see page 90).

• Select “NETWORK” to initialize the network and USB parameters (see page 94).

• Select “ALL” to initialize all the parameters of this unit.

• Select “CANCEL” to cancel the initialization procedure.

Notes

•Use “Initialize” in the sound field program menu to initialize the parameters of the desired program (see page 80).

•When the network settings are reset, “DHCP” in “NET/USB” is automatically set to “On” (see page 94) and the registered client ID of this unit on your Yamaha MCX-2000 is cleared (see page 67).

■ TV format TV FORMAT

Use this feature to set the color encoding format of your television.

Choices: NTSC, PAL Initial setting:

[U.S.A., Canada, General and Korea models]: NTSC

[Other models]: PAL

Note

This parameter setting only affects the video monitor connected to the MONITOR OUT jacks and does not affect the Zone 2 video monitor connected to the ZONE 2 VIDEO jacks.

■HDMI monitor check

MONITOR CHECK

Use this feature to activate or deactivate the monitor check function of this unit. When “MONITOR CHECK” is set to “YES”, this unit receives the information of the available video signal resolutions from the video monitor connected via HDMI and you can only select the resolutions supported by the video monitor in “HDMI Resolution” (see page 90). When “MONITOR CHECK” is set to “SKIP”, you can select any resolution in “HDMI Resolution”.

Choices: YES, SKIP

■ GUI language GUI LANGUAGE

Use this feature to select the language of your choice that appears in the GUI (graphical user interface) menu of this unit.

Choices: ENGLISH (English), JAPANESE (Japanese), FRENCH (French), GERMAN (German), SPANISH (Spanish), RUSSIAN (Russian)

126 En