Yamaha RX-V3800 86 En, Tone Control Tone control, Test Tone, Press 4n to select “EDIT” and press

Graphical user interface (GUI) screen

Test Tone

Use this feature to select whether to turn on or off the test tone output while you are adjusting the tonal quality of each speaker.

Choice	Functions
On	Outputs the test tone.
Off	Does not output the test tone.

2Press 4h to access the settings window.

	PARAM	RESET
Test Tone	EDIT	EXIT
Front L	Band / Gain
Front R
Center

3Press 4k / n / l / h to select “PARAM” and then press 4ENTER to select a parameter

from “Band” (band), “Freq.” (frequency) or “Q” (Q factor).

y

You can adjust “Gain” (gain) with any parameter.

4Press 4n to select “EDIT” and press

4ENTER to access the edit window.

For more information on the parametric equalizer and each parameter, see page 142.

	Band	#1
	Gain	0.0dB
Test Tone	Freq.	62.5Hz
Front L	Q	1.000

Front R

Center

The parameter selected in “PARAM” is highlighted.

•Press 4l / h to adjust the parameter.

•Press 4k / n to adjust the “Gain”.

•Press 4ENTER to exit the edit window.

y

•When you select “Band” in step 3, you can use this menu as a graphic equalizer.

•The “Band #1” and “Band #2” can adjust the frequencies below of 198.4 Hz.

•When you select “Subwoofer” in step 1 and “Band” in step 3, you can adjust “Band #1” and “Band #2” only.

5Repeat steps 3 and 4 until you are satisfied with the results.

y

If you want to reset all “Parametric EQ” parameter settings for the selected speaker, select “RESET” and press

4ENTER.

6Select “EXIT” and press 4ENTER to exit the settings window.

■Tone Control (Tone control)

Use this feature to adjust the balance of bass and treble output to your speakers or headphones.

Note

Tone Control is not effective when:

–PURE DIRECT (see page 51) is selected.

–MULTI CH INPUT is selected as the input source.

Control (Tone control)

ChoiceFunctions

Speaker adjust the bass/treble balance of your speakers.

Headphone adjust the bass/treble balance of your headphones.

y

“Speaker” and “Headphone” adjustments are stored independently. The adjustments for “Speaker” affects the front left/right, center, presence left/right speaker channels and Subwoofer channel.

Bass (Bass control)

Use this feature to adjust low-frequencies output to your speakers or headphones.

Choices: 125Hz, 350Hz, 500Hz

Control range: – 6.0 dB to +6.0 dB

Initial setting: 0.0 dB

	Speaker
Control	Freq : 350Hz
	Gain : 0.0dB
Bass	+6
Treble	0
Auto Bypass	-6

86 En