Yamaha RX-V3800 owner manual Connecting a TV monitor or projector, 23 En

Connections

Connecting a TV monitor or projector

Connect your TV (or projector) to the HDMI OUT jack, the COMPONENT VIDEO MONITOR OUT jacks, the S VIDEO MONITOR OUT jack or the VIDEO MONITOR OUT jack of this unit.

Make sure that this unit and other components are unplugged from the AC wall outlets.

y

You can select to play back HDMI audio signals on this unit or on another HDMI component connected to the HDMI OUT jack on the rear panel of this unit. Use the “Support Audio” parameter in “Option” to select the component to play back HDMI audio signals (see page 98).

Notes

•Some video monitors connected to this unit via a DVI connection fail to recognize the HDMI audio/video signals being input if they are in the standby mode. In this case, the HDMI indicator flashes irregularly.

•Set “Conversion” in “Video” to “On” (see page 89) to display the short message displays.

•The GUI screen appears with the wall paper or gray background depending on the input video signal format and the setting of the parameters in “Wall Paper” (see page 91).

•If the connected video monitor is compatible with the automatic audio and video synchronization feature (automatic lip sync feature), this unit adjusts the audio and video timing automatically (see page 87). Connect the video monitor to the HDMI OUT jack of this unit to use the feature.

PREPARATION

HDMI	COMPONENTVIDEO	VIDEO
	MONITOR OUT	MONITOR OUT
	Y
		SVIDEO
	PB
		VIDEO
	PR
OUT

PRPBY

Component video in

HDMI in

VS

Video in

S-video in

TV

(or projector)

indicates recommended connections

indicates alternative connections

English

23 En