Caution: read this before operating your unit.

1To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference.

2Install this sound system in a well ventilated, cool, dry, clean place – away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. Allow ventilation space of at least 30 cm on the top, 20 cm on the left and right, and 20 cm on the back of this unit.

3Locate this unit away from other electrical appliances, motors, or transformers to avoid humming sounds.

4Do not expose this unit to sudden temperature changes from cold to hot, and do not locate this unit in an environment with high humidity (i.e. a room with a humidifier) to prevent condensation inside this unit, which may cause an electrical shock, fire, damage to this unit, and/or personal injury.

5Avoid installing this unit where foreign objects may fall onto this unit and/or this unit may be exposed to liquid dripping or splashing. On the top of this unit, do not place:

Other components, as they may cause damage and/or discoloration on the surface of this unit.

Burning objects (i.e. candles), as they may cause fire, damage to this unit, and/or personal injury.

Containers with liquid in them, as they may fall and liquid may cause electrical shock to the user and/or damage to this unit.

6Do not cover this unit with a newspaper, tablecloth, curtain, etc. in order not to obstruct heat radiation. If the temperature inside this unit rises, it may cause fire, damage to this unit, and/or personal injury.

7Do not plug in this unit to a wall outlet until all connections are complete.

8Do not operate this unit upside-down. It may overheat, possibly causing damage.

9Do not use force on switches, knobs and/or cords.

10When disconnecting the power cable from the wall outlet, grasp the plug; do not pull the cable.

11Do not clean this unit with chemical solvents; this might damage the finish. Use a clean, dry cloth.

12Only voltage specified on this unit must be used. Using this unit with a higher voltage than specified is dangerous and may cause fire, damage to this unit, and/or personal injury. Yamaha will not be held responsible for any damage resulting from use of this unit with a voltage other than specified.

13To prevent damage by lightning, keep the power cord and outdoor antennas disconnected from a wall outlet or the unit during a lightning storm.

14Do not attempt to modify or fix this unit. Contact qualified Yamaha service personnel when any service is needed. The cabinet should never be opened for any reasons.

15When not planning to use this unit for long periods of time (i.e. vacation), disconnect the AC power plug from the wall outlet.

16Install this unit near the AC outlet and where the AC power plug can be reached easily.

17Be sure to read the “Troubleshooting” section on common operating errors before concluding that this unit is faulty.

18Before moving this unit, press AMASTER ON/OFF to release it outward to the OFF position to turn off this unit, the main room, Zone 2 and Zone 3 and then disconnect the AC power plug from the AC wall outlet.

19VOLTAGE SELECTOR (Asia and General models only) The VOLTAGE SELECTOR on the rear panel of this unit must be set for your local main voltage BEFORE plugging into the AC wall outlet. Voltages are as follows:

................................. 110/120/220/230–240 V AC, 50/60 Hz

20The batteries shall not be exposed to excessive heat such as sunshine, fire or like.

21Excessive sound pressure from earphones and headphones can cause hearing loss.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if you turn off this unit by AMASTER ON/OFF. In this state, this unit is designed to consume a very small quantity of power.

FOR CANADIAN CUSTOMERS

To prevent electric shock, match wide blade of plug to wide slot and fully insert.

This Class B digital apparatus complies with Canadian ICES-003.

POUR LES CONSOMMATEURS CANADIENS

Pour éviter les chocs électriques, introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu’au fond.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

IMPORTANT

Please record the serial number of this unit in the space below.

MODEL:

Serial No.:

The serial number is located on the rear of the unit. Retain this Owner’s Manual in a safe place for future reference.

COMPLIANCE INFORMATION STATEMENT (DECLARATION OF CONFORMITY PROCEDURE)

Responsible Party:

Yamaha Electronics Corporation, U.S.A.

• This device complies with Part 15 of the FCC Rules.

Address:

6660 Orangethorpe Avenue

• Operation is subject to the following conditions:

 

Buena Park, CA 90620

– This device may not cause harmful interference.

Telephone:

714-522-9105

– This device must accept any interference received including

Fax:

714-670-0108

interference that may cause undesired operation.

Type of Equipment:

AV Receiver

See the “Troubleshooting” section at the end of this manual if

Model Name:

RX-V3800

interference to radio reception is suspected.

Caution-iii En

Page 4
Image 4
Yamaha RX-V3800 owner manual Serial No, Fax Interference that may cause undesired operation, AV Receiver

RX-V3800 specifications

The Yamaha RX-V3800 is a sophisticated AV receiver that combines cutting-edge technology with exceptional sound quality. Designed for home theater enthusiasts, the RX-V3800 offers an extensive array of features that enhance audio-visual experiences whether you’re watching movies, playing video games, or listening to music.

One of the standout features of the RX-V3800 is its powerful amplification system, providing an impressive total output of 130 watts per channel across seven channels. This ensures that your audio remains clear and impactful, even at higher volumes. The receiver supports a wide range of audio formats, including Dolby TrueHD, DTS-HD Master Audio, and PCM, enabling it to deliver high-definition sound that fully complements high-definition video.

Another significant aspect of the RX-V3800 is its advanced video processing capabilities. The receiver is equipped with the Faroudja DCDi processing technology, which enhances video quality by reducing artifacts and delivering smoother picture performance. It supports upscaling of standard-definition video to 1080p, ensuring that older video sources look sharp and vibrant when viewed on modern televisions.

In terms of connectivity, the RX-V3800 is versatile and accommodating. It features multiple HDMI inputs and outputs, allowing you to connect a variety of devices, from Blu-ray players to gaming consoles. The receiver also includes component, composite, and S-Video inputs, making it compatible with older equipment. The ability to connect to Ethernet provides options for streaming music over the network and accessing a range of online content.

The RX-V3800 integrates Yamaha’s YPAO (Yamaha Parametric room Acoustic Optimizer) technology, which automatically calibrates the sound output based on the acoustic characteristics of your room. This results in an optimized listening environment, providing balanced audio tailored to your specific space.

Moreover, the RX-V3800 comes equipped with an intuitive user interface that simplifies navigation through settings and options. The on-screen GUI enhances usability, making it easy to access various features and customize your home theater experience.

With support for various multi-room configurations, the RX-V3800 allows for audio distribution throughout your home, creating an immersive experience in multiple areas. Combined with its robust build quality and sleek design, the Yamaha RX-V3800 is an exemplary choice for audiophiles and movie lovers looking to elevate their entertainment systems to new heights. Whether it's the booming sound of an action film or the subtleties of a live concert, the RX-V3800 ensures that every detail is heard and felt.