Yamaha RX-V3800 Manual Setup Sound, 85 En, LFE Level Low-frequency effect level, control

Manual Setup (Sound)

Use this menu to adjust the sound parameters.

1Set the operation mode selector to DAMP and then press GSET MENU on the remote

control.

2Press 4k / n on the remote control to select “Manual Setup” and then press 4h.

3Press 4k / n / l/ h on the remote control to select “Sound” and then press 4h.

4Select the desired parameters and then press 4h to access and adjust.

■LFE Level (Low-frequency effect level)

Use this feature to adjust the output level of the LFE (low- frequency effect) channel according to the capacity of your subwoofer or headphones. The LFE channel carries low-frequency special effects which are only added to certain scenes. This setting is effective only when this unit decodes bitstream signals.

Control range: –20.0 to 0.0 dB

Control step: 1.0 dB

Speakers (Speaker low-frequency effect level)

Select to adjust the speaker LFE level.

Headphones

(Headphone low-frequency effect level)

Select to adjust the headphone LFE level.

Note

Depending on the settings of “Bass Out” (see page 92), some signals may not be output at the SUBWOOFER PRE OUT jack.

■Dynamic Range (Dynamic range)

Use this feature to select the amount of dynamic range compression to be applied to your speakers or headphones. This setting is effective only when the unit is decoding bitstream signals.

Speakers (Speaker dynamic range)

Adjusts the dynamic range compression for the speakers.

Graphical user interface (GUI) screen

Headphones (Headphone dynamic range)

Adjusts the dynamic range compression for the headphones.

Choice	Functions
MAX	Preserves the greatest amount of dynamic range.
STD	Adjusts the dynamic range to medium. When
	this unit is decoding Dolby TrueHD signals, the
	dynamic range control is always active
	regardless of the instruction of the input source
	signals.
MIN/AUTO	• MIN: Adjusts the dynamic range to narrow
	when this unit is decoding bitstream signals
	(except Dolby TrueHD).

•AUTO: Adjusts the dynamic range according to the instruction of the input source signals when this unit is decoding Dolby TrueHD signals.

■Parametric EQ (Parametric equalizer)

Use this feature to adjust the parametric equalizer of each speaker.

LFE Level
Dynamic Range	Test Tone
Parametric EQ	Front L
Tone Control	Front R
Lipsync	Center

1Press 4k / n / l / h to select Test Tone or the speaker you want to adjust.

Choice	Adjusted speaker
Front L	Front left speaker
Front R	Front right speaker
Center	Center speaker
Surround L	Surround left speaker
Surround R	Surround right speaker
Surround Back L	Surround back left speaker
Surround Back R	Surround back right speaker
Presence L	Presence left speaker
Presence R	Presence right speaker
Subwoofer	Subwoofer

OPERATION ADVANCED

English

85 En